Garmin 010-C0627-00 - MapSource BlueChart g2 Panduan Pengguna - Halaman 20
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk GPS Garmin 010-C0627-00 - MapSource BlueChart g2. Garmin 010-C0627-00 - MapSource BlueChart g2 30 halaman. Software de mapeamento
Juga untuk Garmin 010-C0627-00 - MapSource BlueChart g2: Panduan Pengguna (24 halaman), Panduan Pemilik (2 halaman), Panduan Pengguna (15 halaman), Panduan Pengguna (28 halaman), Panduan Pengguna (Bahasa Portugis) (30 halaman)
Halaman Cetak
u
M
s
>
c
sIng
ap
ource
reatIng and
Creating and Editing Waypoints
A waypoint is any point on the Graphic Map that you
store in memory. Waypoints are also known as "My
Locations" or "Favorites" in some GPS Units. You can
easily create waypoints in MapSource and then transfer
them to your GPS unit. You can also load waypoints
from your GPS unit into MapSource and then edit
them. To send and receive information from your GPS
unit, see
page
12.
Creating Waypoints
When you create a waypoint, MapSource automatically
names the waypoint based on its location. If you create
a waypoint on an existing map feature, MapSource
bases the waypoint name on the feature. If you create
a waypoint on an open location, MapSource names the
waypoint with a number. Each waypoint you create
appears in the Waypoints tab on the left side of
the window.
e
W
dItIng
aYpoInts
To create a waypoint:
1. Click the Waypoint tool
Waypoint.
2. Locate the place and then click anywhere on
the Graphic Map to create a waypoint at that
exact spot. To create a waypoint in the center
of the Graphic Map, press Ctrl + W on your
keyboard. The Waypoint Properties dialog box
appears.
Waypoint Properties dialog box
3. Make changes to the waypoint properties
as necessary. Click More
available waypoint properties.
4. Click OK to save the waypoint. Click Cancel to
exit without creating the waypoint.
or click Tools >
Details to view all
MapSource User's Manual