Garmin AA3001 Panduan Pemilik - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk GPS Garmin AA3001. Garmin AA3001 21 halaman.

Halaman Cetak
2
Go outside, and wait while the device locates satellites.
The satellite bars turn green when the device is ready.
3
From the home screen, select
4
Select
to start the timer.
NOTE: History is recorded only while the timer is running.
5
Swipe left or right to view additional data screens.
You can swipe down from the top of the data screens to view
the connections screen.
6
If necessary, tap the screen to view the timer overlay.
7
Select
to stop the timer.
TIP: Before you save this ride and share it on your Garmin
Connect account, you can change the ride type. Accurate
ride type data is important for creating bike friendly courses.
8
Select Save Ride.
9
Select
.
Acquiring Satellite Signals
The device may need a clear view of the sky to acquire satellite
signals. The time and date are set automatically based on the
GPS position.
1
Go outdoors to an open area.
The front of the device should be oriented toward the sky.
2
Wait while the device locates satellites.
It may take 30–60 seconds to locate satellite signals.
Locations
You can record and store locations in the device.
Marking Your Location
Before you can mark a location, you must locate satellites.
If you want to remember landmarks or return to a certain spot,
you can mark a location.
1
Go for a ride.
2
Select Where To? >
Saving Locations from the Map
1
Select Where To? >
Point.
2
Browse the map for the location.
3
Select the location.
Location information appears at the top of the map.
4
Select the location information.
5
Select
>
.
Navigating to a Location
1
Select Where To?.
2
Select an option:
• Select Search Tools to navigate to a point of interest, city,
intersection, or known coordinates.
• Select Addresses to enter a specific address.
Navigation
.
> Mark Location >
.
> Search Select Area > A Map
• Select Saved Locations to navigate to a saved course or
location.
• Select Recent Finds to navigate to one of the last 50
locations you have found.
• Select
> Search Select Area to narrow your search
area.
3
Select a location.
4
Select Ride.
5
Follow the on-screen instructions to your destination.
Navigating to Known Coordinates
1
Select Where To? > Search Tools > Coordinates.
2
Enter the coordinates, and select
3
Follow the on-screen instructions to your destination.
Navigating Back to Start
At any point during your ride, you can return to the starting point.
1
Go for a ride
(Going for a Ride, page
2
During your ride, select anywhere on the screen to view the
timer overlay.
3
Select
> Where To? > Back to Start.
4
Select Along Same Route or Most Direct Route.
5
Select Ride.
The device navigates you back to the starting point of your
ride.
Stopping Navigation
1
Select anywhere on the screen to view the timer overlay.
2
Scroll to the map.
3
Select
>
.
Projecting a Location
You can create a new location by projecting the distance and
bearing from a marked location to a new location.
1
Select Where To? > Saved Locations.
2
Select a location.
3
Select the location information at the top of the screen.
4
Select
> Project Location.
5
Enter the bearing and distance to the projected location.
6
Select
.
Editing Locations
1
Select Where To? > Saved Locations.
2
Select a location.
3
Select the information bar at the top of the screen.
4
Select
.
5
Select an attribute.
For example, select Change Elevation to enter a known
altitude for the location.
6
Enter the new information, and select
.
2).
.
3