AEG B8831-5 Panduan Pengguna - Halaman 46

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Oven AEG B8831-5. AEG B8831-5 48 halaman. Aeg built-in electric oven

Halaman Cetak

Disposal

Problem

F11 appears in the clock

display

An error code not listed

above appears in the time

display

If you are unable to remedy the problem by following the above suggestions,

please contact your local Service Force Centre.

Warning! Repairs to the appliance are only to be carried out by qualified service engi-

neers. Considerable danger to the user may result from improper repairs.

If the appliance has been operated incorrectly, the engineer's visit will be chargeable,

even during the warranty period.

Advice on cookers with metal fronts:

Because of the cold surface at the front of the cooker, opening the oven door during (or

just after) baking or roasting may cause the glass to steam up.

Disposal

Packaging material

The packaging materials are environmentally friendly and can be recycled. The plastic

components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the pack-

aging materials in the appropriate container at the community waste disposal facilities.

Old appliance

The symbol

be treated as household waste. Instead it shall be handed over to the applicable collec-

tion point for the recycling of electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent potential negative consequences

for the environment and human health, which could otherwise be caused by inappropri-

ate waste handling of this product. For more detailed information about recycling of this

product, please contact your local city office, your household waste disposal service or

the shop where you purchased the product.

Warning: So that the old appliance can no longer cause any danger, make it unusable

before disposing of it.

To do this, disconnect the appliance from the mains supply and remove the mains

cable from the appliance.

Possible cause

The meat probe has short

circuited or the plug of the meat

probe is not firmly in position in

the socket

Fault in the electronics

on the product or on its packaging indicates that this product may not

Remedy

Insert the plug of the meat

probe as far as it will go into the

socket on the side wall of the

oven

Switch off the appliance via the

house fuse or the safety switch

in the fuse box and switch it on

again.

If displayed again, please con-

tact the Customer Care Depart-

ment