Alinea 200SS Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Alinea 200SS. Alinea 200SS 14 halaman. Gsm callshop desktop phone

Power off

Shut off the main power and push the power switch to "OFF" side, the telephone
will be turned off and the LCD is cleared.

Operation

Menu

NOTICE: In main menu, users can't enter "SETTINGS" menu unless correct setting
password is input. In CALL REGISTER menu, users password is valid for erasing
"CALL LISTS", erasing "CALL STATISTICS", reset accumulated charge and menu-
locking enable and disable. Please notice that user's password and setting
password is not the same one. They can be the same or be different.
NETWORK NAME STANDBY
01/05/2005 15:12
1.
Select gateway
Only the back keys are valid for selecting gateway. a) In standby status, press
"Reset" the LCD display as following
SELECT GATEWAY NO.1 12345678
b)
Press "UP" and "Down" to select gateway. Press "OK" to save the selection.
NO.1 is the serial code of the gateway and "12345678" is gateway's number. If the
number of gateway is not setup, "NULL" will be shown replacing "12345678".

Make calls

a)
Lift the handset or press "Hand Free", the LCD shows "PRESS OK TO
REDIAL", dial upon hearing the dialing tone
b)
On completion of dialing digits, press "OK" to send the dialed telephone
number. If there is no dialing for continuous 6 seconds, and the dialed number is 2
digits or is more than 2 digits, the telephone will send out the number
automatically. The LCD shows number sending indication. If the number dialed is
less than 2 digits and there is not any dialing for continuous 6s, the telephone will
return to standby status. If the dialed number is a barred one, the LCD shows
"BARRED NO." and returns to standby status.
BARRED NO. 12345678
AlineA Ltd.
Page 5 of 14
200SS GSM CallShop Desktop Phone
Users Manual