Garmin Zumo XT Panduan Pemilik - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk GPS Garmin Zumo XT. Garmin Zumo XT 49 halaman.
Juga untuk Garmin Zumo XT: Panduan Memulai Cepat (8 halaman), Panduan Petunjuk Instalasi (46 halaman)

Halaman Cetak

Driving Map View: Sets the perspective on the map.

Map Detail: Sets the level of detail on the map. More detail may

cause the map to draw slower.

Map Theme: Changes the color of the map data.

Map Layers: Sets the data that appears on the map page

(Customizing the Map Layers, page

Auto Zoom: Automatically selects the zoom level for optimal

use of your map. When disabled, you must zoom in or out

manually.

Skip Next Stop Confirmation: Sets a confirmation message to

appear when skipping a location on your route.

myMaps: Sets which installed maps the device uses.

Enabling Maps

You can enable map products installed on your device.

TIP: To purchase additional map products, go to

http://buy.garmin.com.

Select Settings > Map & Vehicle > myMaps.

Select a map.

Navigation Settings

Select Settings > Navigation.

Calculation Mode: Sets the route calculation method.

Off-Route Recalculation: Sets recalculation preferences when

navigating away from an active route.

Avoidances: Sets road features to avoid on a route.

Custom Avoidances: Allows you to avoid specific roads or

areas.

Toll Roads: Sets preferences for avoiding toll roads.

Tolls and Fees: Sets preferences for avoiding toll roads and toll

stickers.

NOTE: This feature is not available in all areas.

Environmental Zones: Sets the avoidance preferences for

areas with environmental or emissions restrictions that may

apply to your vehicle.

Restricted Mode: Disables all functions that require significant

operator attention.

GPS Simulator: Stops the device from receiving a GPS signal,

and saves battery power.

Calculation Mode Settings

Select Settings > Navigation > Calculation Mode.

The route calculation is based on road speeds and vehicle

acceleration data for a given route.

Faster Time: Calculates routes that are faster to drive but can

be longer in distance.

Shorter Distance: Calculates routes that are shorter in distance

but can take more time to drive.

Off Road: Calculates a direct line from your location to your

destination.

Setting a Simulated Location

If you are indoors or not receiving satellite signals, you can use

the GPS simulator to plan routes from a simulated location.

Select Settings > Navigation > GPS Simulator.

From the main menu, select View Map.

Tap the map twice to select an area.

The address of the location appears at the bottom of the

screen.

Select the location description.

Select Set Location.

13).

Bluetooth Settings

Select Settings > Wireless Networks.

Bluetooth: Enables Bluetooth wireless technology.

Search for Devices: Searches for nearby Bluetooth devices.

Friendly Name: Allows you to enter a friendly name that

identifies your device on other devices with Bluetooth

wireless technology.

Wi‑Fi Settings

The wireless network settings allow you to manage Wi‑Fi

networks.

Select Settings > Wireless Networks.

Wi-Fi: Enables the Wi‑Fi radio.

Saved Networks: Allows you to edit or remove saved networks.

Search for Networks: Searches for nearby Wi‑Fi networks

‑ Fi Network, page

(Connecting to a Wi

Driver Assistance Settings

Select Settings > Driver Assistance.

Rider Alerts: Allows you to enable or disable alerts for

upcoming zones or road conditions

Features and Alerts, page

Speeding Alert: Alerts you when you are exceeding the speed

limit.

Route Preview: Shows a preview of the major roads in your

route when you start navigation.

Break Planning: Reminds you to take a break and shows

upcoming services after you drive for an extended time. You

can enable or disable break reminders and upcoming service

suggestions.

Automatic Incident Detection: Enables the device to detect a

possible vehicle incident.

Incident Notification: Allows you to set up a contact to be

notified when the device detects a possible vehicle incident.

Proximity Alerts: Alerts you when you approach speed

cameras or red light cameras.

Display Settings

Select Settings > Display.

Orientation: Allows you to set the display to portrait (vertical) or

landscape (horizontal).

NOTE: This feature is not available on all product models.

Color Mode: Allows you to select day or night color mode. If you

select the Auto option, the device automatically switches to

day or night colors based on the time of day.

Brightness: Allows you to adjust the display brightness.

Display Timeout: Allows you to set the amount of idle time

before your device enters sleep mode while using battery

power.

Screenshot: Allows you to take a picture of the device screen.

Screenshots are saved in the Screenshot folder of the device

storage.

Traffic Settings

From the main menu, select Settings > Traffic.

Traffic: Enables traffic.

Current Provider: Sets the traffic provider to use for traffic data.

The Auto option selects the best available traffic data

automatically.

Subscriptions: Lists the current traffic subscriptions.

Optimize Route: Enables the device to use optimized alternate

routes automatically or upon request

on Your Route, page

7).

19).

(Rider Awareness

3).

(Avoiding Traffic Delays

zūmo Settings