Garmin D2 Pilot Panduan Pemilik - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Menonton Garmin D2 Pilot. Garmin D2 Pilot 24 halaman.
Juga untuk Garmin D2 Pilot: Panduan Memulai Cepat (4 halaman), Panduan Memulai Cepat (4 halaman), Panduan Pemilik (24 halaman)
Halaman Cetak
2
Select GPS Tools > MOB > Start.
The map page opens showing the route to the MOB location.
3
Navigate using the compass
Geocaches
A geocache is like a hidden treasure. Geocaching is when you
hunt for hidden treasures using GPS coordinates posted online
by those hiding the geocache.
Downloading Geocaches
1
Connect your device to a computer using the USB cable.
2
Go to www.opencaching.com.
3
If necessary, create an account.
4
Sign in.
5
Follow the on-screen instructions to find and download
geocaches to your device.
Navigating to a Geocache
Before you can navigate to a geocache, you must go to
www.opencaching.com, and download a geocache to your
device.
Navigating to a geocache is like navigating to any other
location.
• See the navigation section
• Go to the profiles section
geocaching.
• Go to the geocache settings
device settings.
• Go to the data pages section
data fields.
Logging the Attempt
After you have attempted to find a geocache, you can log your
results.
1
Select the action key.
2
Select GPS Tools > Geocaches > Log Attempt.
3
Select Found, Did Not Find, or Unattempted.
4
Select an option:
• To begin navigation to a geocache nearest you, select
Find Next.
• To end the logging, select Done.
chirp™
A chirp is a small Garmin accessory that is programmed and left
in a geocache. You can use your device to find a chirp in a
geocache. For more information about the chirp, see the chirp
Owner's Manual at www.garmin.com.
Finding a Geocache with a chirp Device
1
Select the action key.
2
Select Setup > Geocaches > chirp > On.
3
Hold
.
4
Select Start GPS.
5
Wait while the device locates satellites.
6
Select the action key.
7
Select GPS Tools > Geocaches.
8
Select a geocache, and select chirp to show chirp details
while you are navigating.
9
Select Go, and navigate to the geocache
Geocaches
(page
5) or map
(page
(page
5) for more information.
(page
3) to create a profile for
(page
11) to customize your
(page
10) to customize your
(page
5).
When you are within 33 ft. (10 m) of the geocache that
contains a chirp device, a message appears.
6).
To use some applications, you must add the application or the
GPS Tools option to the main menu
Jumpmaster
The jumpmaster feature is designed for experienced skydivers,
particularly those in the military.
The jumpmaster feature follows military guidelines for
calculating the high altitude release point (HARP). The device
detects automatically when you have jumped to begin
navigating toward the desired impact point (DIP) using the
barometer and electronic compass.
Planning a Jump
Jumpmaster is for use by experienced skydivers only.
Jumpmaster should not be used as a primary skydiving
altimeter. Failure to input the appropriate jump related
information into Jumpmaster can lead to serious personal injury
or death.
1
Select a jump type
2
Enter the jump information
The device calculates the HARP.
3
Select GOTO HARP to start navigation to the HARP.
Jump Types
The jumpmaster feature allows you to set the jump type to one
of three types: HAHO, HALO, or Static. The jump type selected
determines what additional setup information is required
(page
7). For all jump types, drop altitudes and opening
altitudes are measured in feet above ground level (AGL).
HAHO: High Altitude High Opening. The jumpmaster jumps
from a very high altitude and opens the parachute at a high
altitude. You must set a DIP and a drop altitude of at least
1,000 feet. The drop altitude is assumed to be the same as
the opening altitude. Common values for a drop altitude
range from 12,000 to 24,000 feet AGL.
HALO: High Altitude Low Opening. The jumpmaster jumps from
a very high altitude and opens the parachute at a low
altitude. The required information is the same as the HAHO
jump type, plus an opening altitude. The opening altitude
must not be greater than the drop altitude. Common values
for an opening altitude range from 2,000 to 6,000 feet AGL.
Static: The wind speed and direction are assumed to be
constant for the duration of the jump. The drop altitude must
be at least 1,000 feet.
Entering Jump Information
1
Select the action key.
2
Select Jumpmaster.
3
Select a jump type
4
Complete one or more actions to enter your jump
information:
• Select DIP to set a waypoint for the desired landing
location.
• Select Drop Alt to set the drop altitude AGL (in feet)
when the jumpmaster exits the aircraft.
• Select Open Alt to set the open altitude AGL (in feet)
when the jumpmaster opens the parachute.
• Select FWD Throw to set the horizontal distance traveled
(in meters) due to aircraft speed.
Applications
(page
9).
WARNING
(page
7).
(page
7).
(page
7).
7