Garmin epix Panduan Pemilik - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Menonton Garmin epix. Garmin epix 28 halaman. Touchscreen gps/glonass mapping watch
Juga untuk Garmin epix: Panduan Memulai Cepat (23 halaman)

Halaman Cetak

1. Device Overview

environmental pressure data based on the fixed elevation where

the altimeter was most recently calibrated

Altimeter Settings

Hold

, and select Settings > Sensors > Altimeter.

Auto Cal.: Allows the altimeter to self-calibrate each time you

turn on GPS tracking.

Calibrate: Allows you to manually calibrate the altimeter sensor.

Calibrating the Barometric Altimeter

Your device was already calibrated at the factory, and the

device uses automatic calibration at your GPS starting point by

default. You can manually calibrate the barometric altimeter if

you know the correct elevation or the correct sea level pressure.

Hold

Select Settings > Sensors > Altimeter.

Select an option:

• To calibrate automatically from your GPS starting point,

select Auto Cal. > Once.

• To calibrate automatically with periodic GPS calibration

updates, select Auto Cal. > Continuous.

• To enter the current elevation, select Calibrate.

Barometer Settings

Hold

, and select Settings > Sensors > Barometer.

Plot: Sets the time scale for the chart in the barometer widget.

Storm Alert: Sets the rate of barometric pressure change that

triggers a storm alert.

Map Settings

You can customize how the map appears in the map widget and

data screens.

Hold

, and select Settings > Map.

Configure Maps: Shows or hides data from installed map

products.

Orientation: Sets the orientation of the map. The North Up

option shows north at the top of the screen. The Track Up

option shows your current direction of travel at the top of the

screen.

Auto Zoom: Automatically selects the zoom level for optimal

use of your map. When disabled, you must zoom in or out

manually.

Track Log: Shows or hides the track log, or the path you have

traveled, as a colored line on the map.

User Locations: Shows or hides saved locations on the map.

Showing and Hiding Map Data

If you have multiple maps installed on your device, you can

choose the map data to show on the map.

Hold

Select Settings > Map > Configure Maps.

Select a map to activate the toggle switch, which shows or

hides the map data.

System Settings

Hold

, and select Settings > System.

User Profile: Allows you to access and customize your personal

statistics

(Setting Up Your User

Language: Sets the language displayed on the device.

Time: Adjusts the time settings

Backlight: Adjusts the backlight settings

Sounds: Sets the device sounds, such as key tones, alerts, and

vibrations.

(Altimeter

Settings).

Profile).

(Time

Settings).

(Backlight

Settings).

Units: Sets the units of measure used on the device

the Units of

Measure).

GLONASS: You can enable the GLONASS option for increased

performance in challenging environments and faster position

acquisition. Using the WAAS/EGNOS and GLONASS options

can reduce battery life more than using the GPS option only.

WAAS/EGNOS: You can enable the WAAS/EGNOS option for

increased performance in challenging environments and

faster position acquisition. Using the WAAS/EGNOS and

GLONASS options can reduce battery life more than using

the GPS option only.

Pos. Format: Sets the geographical position format and datum

options.

Format: Sets general format preferences, such as the pace and

speed shown during activities, and the start of the week.

Data Recording: Sets how the device records activity data. The

Smart recording option (default) allows for longer activity

recordings. The Every Second recording option provides

more detailed activity recordings, but may not record entire

activities that last for longer periods of time.

USB Mode: Sets the device to use mass storage mode or

Garmin mode when connected to a computer.

Restore Defaults: Allows you to reset user data and settings

(Restoring All Default

Settings).

Software Update: Allows you to install software updates

downloaded using Garmin Express.

About: Displays device, software, and license information.

Time Settings

Hold

, and select Settings > System > Time.

Time Format: Sets the device to show time in a 12-hour or 24-

hour format.

Set Time: Sets the time zone for the device. The Auto option

sets the time zone automatically based on your GPS position.

Time: Allows you to adjust the time if it is set to the Manual

option.

Backlight Settings

Hold

, and select Settings > System > Backlight.

Mode: Sets the backlight to turn on manually or for keys and

alerts.

Timeout: Sets the length of time before the backlight turns off.

Changing the Units of Measure

You can customize units of measure for distance, pace and

speed, elevation, weight, height, and temperature.

Hold

Select Settings > System > Units.

Select a measurement type.

Select a unit of measure.

ANT+ Sensors

The device is compatible with these optional, wireless ANT+

accessories.

• Heart rate monitor, such as HRM-Run

Rate

Monitor)

• Bike speed and cadence sensor

Cadence

Sensor)

• Foot pod

(Foot

Pod)

• Power sensor, such as Vector

• tempe

™

wireless temperature sensor (tempe)

For information about compatibility and purchasing additional

sensors, go to http://buy.garmin.com.

(Changing

(Putting On the Heart

(Using an Optional Bike

™

ANT+ Sensors