Garmin FORETREX 601 BALLISTIC EDITION Panduan Pemilik - Halaman 22
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Menonton Garmin FORETREX 601 BALLISTIC EDITION. Garmin FORETREX 601 BALLISTIC EDITION 30 halaman. Ballistic edition
Juga untuk Garmin FORETREX 601 BALLISTIC EDITION: Panduan Pemilik (18 halaman)
Halaman Cetak
Device Care
Before you attempt to replace the battery, carefully read the instructions in the owner's manual.
Avoid extreme shock and harsh treatment, because it can degrade the life of the product.
Thoroughly rinse the device with fresh water after exposure to chlorine, salt water, sunscreen, cosmetics,
alcohol, or other harsh chemicals. Prolonged exposure to these substances can damage the case.
Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes.
Always wipe the device dry after cleaning or use, and store it in a cool, dry place.
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause
permanent damage.
Cleaning the Device
1 Wipe the device using a cloth dampened with a mild detergent solution.
2 Wipe it dry.
After cleaning, allow the device to dry completely.
TIP: For more information, go to www.garmin.com/fitandcare.
Data Management
NOTE: The device is not compatible with Windows
Connecting the Device to Your Computer
You can use the Foretrex device as a USB mass storage device by connecting it to your computer with a USB
cable.
1 Turn the D-ring counter-clockwise, and pull up to open the rear cover.
2 Plug the small end of the USB cable into the USB port on the device.
3 Plug the large end of the USB cable into a computer USB port.
4 Select YES to enter mass storage mode.
Your device appears as a removable drive in My Computer on Windows computers and as a mounted
volume on Mac computers.
Transferring Files to Your Device
1 Connect the device to your computer.
On Windows computers, the device appears as a removable drive or a portable device. On Mac computers,
the device appears as a mounted volume.
NOTE: Some computers with multiple network drives may not display device drives properly. See your
operating system documentation to learn how to map the drive.
2 On your computer, open the file browser.
3 Select a file.
4 Select Edit > Copy.
5 Open the portable device, drive, or volume for the device.
6 Browse to a folder.
7 Select Edit > Paste.
The file appears in the list of files in the device memory.
18
NOTICE
95, 98, Me, Windows NT
®
, and Mac
OS 10.3 and earlier.
®
®
Device Information