Garmin Vivofit Panduan Pemilik - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Menonton Garmin Vivofit. Garmin Vivofit 8 halaman. Fitness bracelet
Juga untuk Garmin Vivofit: Panduan Pemilik (4 halaman), Panduan Cepat (25 halaman), Panduan Pemilik (6 halaman)

Halaman Cetak

Replacing the Heart Rate Monitor Battery

Locate the circular battery cover on the back of the heart rate

monitor.

Use a coin to twist the cover counter-clockwise until it is

loose enough to remove (the arrow points to OPEN).

Remove the cover and the battery.

Wait 30 seconds.

Insert the new battery with the positive side facing up.

NOTE: Do not damage or lose the O-ring gasket.

Use a coin to twist the cover clockwise back into place (the

arrow points to CLOSE).

After you replace the heart rate monitor battery, you may need

to pair the heart rate monitor with the device again.

Troubleshooting

My device won't turn on

If your device no longer turns on, you may need to replace the

batteries.

Go to

Replacing the vívofit 2 Device Batteries, page

My step count does not seem accurate

If your step count does not seem accurate, you can try these

tips.

• Wear the device on your non-dominant wrist.

• Carry the device in your pocket when pushing a stroller or

lawn mower.

• Carry the device in your pocket when actively using your

hands or arms only.

NOTE: The device may interpret some repetitive motions,

such as washing dishes, folding laundry, or clapping your

hands, as steps.

The step counts on my device and my Garmin

Connect account don't match

The step count on your Garmin Connect account updates when

you synchronize your device.

Select an option:

• Synchronize your step count with the Garmin Connect

application

(Synchronizing Your Data with Your Computer,

page

1).

• Synchronize your step count with the Garmin Connect

Mobile app

(Synchronizing Your Data with the Garmin

Connect Mobile App, page

Wait while the device synchronizes your data.

Synchronizing can take several minutes.

vívofit 2 Owner's Manual

1).

NOTE: Refreshing the Garmin Connect Mobile app or the

Garmin Connect application does not synchronize your data

or update your step count.

My device does not display the correct time

The device updates the time and date when you synchronize

your device to a computer or mobile device. You should

synchronize your device to receive the correct time when you

change time zones, and to update for daylight saving time.

Confirm that your computer or mobile device displays the

correct local time.

Select an option:

• Synchronize your device to a computer

Your Data with Your Computer, page

• Synchronize your device to a mobile device

(Synchronizing Your Data with the Garmin Connect Mobile

App, page

1).

The time and date are updated automatically.

I don't have a computer or mobile device

You can turn on the device and use it with limited functionality,

until you complete the setup process on a computer or mobile

device. Prior to setup, you can use only the step count, auto

goal, move bar, and heart rate monitor (if packaged with your

device). Your device resets your step count once a day. The

device attempts to reset your step count while you are sleeping,

based on your inactivity level from your first day of use. Your

device does not store any history data until setup is complete.

Set up the device on a computer or compatible mobile device

(Getting Started, page

1) to use additional device features.

NOTE: Setup is a one-time process, and it allows you to use

all available device features.

Turning on the Device

Select the device key

Replacing the Band

Remove the module from the band.

Insert the module into the replacement band.

The device key on the module must be aligned with the key

on the band.

(Synchronizing

1).