Brother 681B-UG Panduan Pengguna - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin Jahit Brother 681B-UG. Brother 681B-UG 39 halaman.

HOW TO FINISH YOUR SEWING PROJECT

(REVERSE STITCHING)

Reverse stitching is used to reinforce stitches near

the edge of material or wherever reinforcement is

needed.

1. That is done by stitching to the material edge...

then stopping.

2. Push Reverse Sewing Button and stitch

backwards for ½ inch (10mm) from material

edge.

HOW TO REMOVE FINAL SEWING FROM

MACHINE

1. Stop the machine.

2. Raise needle to its highest position and make

sure that the thread take-up lever is in the

highest position also.

3. Lift presser foot and pull out the material gently

to the left side diagonally.

4. Cut both threads on the thread cutter.

5. Leave 4 inches (10cm) of thread between the

presser foot loose while the thread take-up lever

is at highest position. You are ready to sew.

Generally it is enough to guide the material in front

of the presser foot as shown in the upper

illustration.

However, in case of special materials such as tricot,

crepes, knits, etc., we recommend you to support

the material both in front and back of the presser

foot with gentle tension as shown in the lower

illustration.

-18-