Brother 681B-UG Panduan Pengguna - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin Jahit Brother 681B-UG. Brother 681B-UG 39 halaman.

MONOGRAMMING, USING EMBROIDERY HOOP

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

1. Remove presser foot.

2. Draw lettering on the right side of the

material.

3. Stretch work between embroidery hoops

as firmly as possible.

4. Place the work under the needle and

lower presser bar.

5. Pull lower thread up through the material

at starting position by turning balance

wheel and holding both threads.

6. Hold the hoop with thumb and forefinger

of both hands while pressing the material

with middle and third fingers and

supporting the outside of hoop with

smaller finger.

7. Start sewing, moving hoop lightly along

the lettering with even rate of speed

while controlling zigzag width lever

with your right hand.

-26-