Brother 885-X01 Panduan Pengoperasian - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Mesin Jahit Brother 885-X01. Brother 885-X01 44 halaman.
Juga untuk Brother 885-X01: Panduan Operasional (44 halaman), Panduan Pengoperasian (44 halaman), Panduan Pengoperasian (44 halaman)
Halaman Cetak
KNOWING YOUR SEWING MACHINE — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
CAUTION
Not winding the bobbin properly may
●
cause the thread tension to loosen, and
may break the needle.
1
1 Wound evenly
2 Wound poorly
Lower threading
Install the bobbin wound with thread.
• For more details on using the quick-set
bobbin, see page 14.
CAUTION
Make sure you turn off the machine
●
while threading. If you accidentally step
on the foot controller and the machine
starts to sew, you could be injured.
Prepare the bobbin wound properly
1
before threading the lower thread.
• See page 11 for the details about bobbin
winding.
Raise the needle by turning the
2
handwheel toward you
(counterclockwise) and raise the presser
foot lever.
Remove the bobbin cover by sliding it and
3
lift toward you.
1 Bobbin cover
13
4
2
●
5
1
Put the bobbin in so the thread comes out
in the direction shown by the arrow.
CAUTION
Make sure you set the bobbin so the
thread unrolls in the right direction. If
the thread unrolls in the wrong
direction, it may cause the thread
tension to be incorrect or break the
needle.
Hold the end of the thread, push the
bobbin down with your finger, and then
pass the thread through the slit, as shown.
• If the thread is not correctly inserted through
the tension-adjusting spring of the bobbin
case, it may cause incorrect thread tension.
1
1 Tension-adjusting spring