Brother 885-X03 Panduan Pengoperasian - Halaman 28
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Mesin Jahit Brother 885-X03. Brother 885-X03 48 halaman.
Juga untuk Brother 885-X03: Panduan Pengoperasian (48 halaman), Panduan Pengoperasian (48 halaman)
Halaman Cetak
BUILT-IN STITCHES — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
3
BUILT-IN STITCHES
Straight stitching
Straight stitches are used for sewing plain seams.
Stitch Name
Straight Stitch
(Left Needle Position)
Straight Stitch
(Center Needle Position)
Triple Stretch Stitch
(Left Needle Position)
Triple Stretch Stitch
(Center Needle Position)
■ Top stitching and stretch materials
You can use a straight stitch for top stitching and
sewing lightweight fabrics.
You can use a triple stretch stitch for sewing stretch
fabrics.
Zigzag stitching
Stitch Name
Pattern
4
Zigzag Stitch
5
Zigzag Stitch
6
Zigzag Stitch
27
Stitch Length
Pattern
[mm (inch)]
2
1-4
(1/16-3/16)
3
1-4
(1/16-3/16)
14
Fixed
2.5 (3/32)
15
Fixed
2.5 (3/32)
Stitch
Stitch Width
Length
[mm (inch)]
[mm (inch)]
F-4
1.5 (1/16)
(1/64-3/16)
F-4
3.5 (1/8)
(1/64-3/16)
F-4
5 (3/16)
(1/64-3/16)
■ Zigzag stitch
Turn the pattern selection dial to the Zigzag Stitch,
and then start sewing.
We recommend that you sew using the Straight
Stitch at the beginning and end of zigzag stitches.
(This acts as a reinforcement stitch.)
■ Satin stitch
Setting the Zigzag Stitch length in the "F"-"1" range
produces a satin stitch (close zigzag stitch). The
Satin Stitch can be used for making buttonholes and
decorative stitches. Set the pattern selection dial to
the Zigzag Stitch, set the stitch length in the "F"-"1"
range.
Blind hem stitching
Stitch Name
Pattern
9
Stretch Blind
Hem Stitch
You can use the Blind Hem Stitch to finish the edge of a
project, like the hem of a pair of trousers, without the
stitch showing.
Memo
● When the size of cylindrical pieces is too
small to slide onto the arm or the length is
too short, the fabric will not feed and
desired results may not be achieved.
Stitch
Stitch Width
Length
[mm (inch)]
[mm (inch)]
F-1.5
3 (1/8)
(1/64-1/16)