Garmin Nuvi 465 Panduan Memulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Sistem Navigasi Mobil Garmin Nuvi 465. Garmin Nuvi 465 19 halaman. Garmin nuvi 465: quick start
Juga untuk Garmin Nuvi 465: Panduan Memulai Cepat (8 halaman)

Halaman Cetak

5. Snap the cradle onto the mounting

arm.

Mounting arm

with cradle

Mounting

base

Before mounting the traffic receiver, see the

important Salet)' and Prodllctinformation guide

for information about laws pertaining to windshield

mounting.

6. Slide the mounting arm with cradle

attached into the mounting base.

7. Slide the locking lever into the locked

position.

Set Up Your nuvi

Attach the Adhesive Disk and

the Mounting Base to Your

Dashboard

CAUTION: The pennanent adhesive

disk is extremely difficult to remove.

1. Clean and dry the area where you

want to place the mounting base.

2. Select the adhesive disk you want

to use, and remove one side of the

backing.

Temporary Disk Permanent Disk

3. Place the adhesive disk on the bottom

of the mounting base, and remove the

other side of the backing.

4. Place the mounting base so that the

locking lever is facing you. Position

the base on the cleaned area. Apply

pressure to adhere the base to the

dashboard.

nuvi

465 quick start manual