Garmin Oregon 300 Panduan Referensi Cepat
Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Sistem Navigasi Mobil Garmin Oregon 300. Garmin Oregon 300 2 halaman. Oregon series
Juga untuk Garmin Oregon 300: Panduan Pemilik (48 halaman), Panduan Memulai Cepat (8 halaman), Panduan Pemilik (26 halaman), Manual (Denmark) (48 halaman)
Halaman Cetak
Navigating to a Destination
To navigate to a point using
Where
To?:
1.
On the Main Menu, touch Where
To?.
2. Touch a category.
3. Touch the item to which you want to navigate.
4. Touch Go. A colored line indicates your course.
5. Touch
> Compass.
6. Use the compass to navigate to your destination.
Information button
To navigate to a point on the map:
1. On the Main Menu, touch Map.
2. Touch the point on the map.
3. Touch the information button at the top of the
screen.
4. Touch Go >
> Compass.
5. Use the compass to navigate to your
destination.
To stop navigating, touch
Where To?
>
Stop
Navigation.
Using the Compass
To open the Compass page:
On the Main Menu, touch Compass.
Hold the compass level when
Data fields
navigating.
Direction you
are currently
The bearing pointer points to
traveling
your destination, regardless of
the direction you are moving.
Bearing to
If the bearing pointer points
destination
toward the top of the compass,
you are traveling directly toward
your destination. If it points any other direction, turn toward
that direction until the arrow is pointing toward the top of the
compass.
Calibrate the compass after moving large distances, experiencing
temperature changes, or changing the batteries.
To calibrate the electronic compass (Oregon 300, 400t,
400c, and 400i):
1. While outdoors, hold the Oregon level and do not stand near
objects that influence magnetic fields, such as cars, buildings,
or overhead power lines.
2.
On the Main Menu, touch Setup > Heading > Press To Begin
Compass
Calibration.
3. Touch Start and follow the on-screen directions.
Creating Routes and Using Tracks
To create and navigate a new route:
1.
On the Main Menu, touch Route Planner > <Create
<Select First Point>
to select a starting point.
2. Touch a category.
3. Touch the first item on the route.
4.
Touch Use > <Select Next
Point>.
5. Repeat until the route is complete.
6. Touch
to save the route.
7. Touch
> Where
To? > Routes to navigate the route.
To record your tracks:
1.
On the Main Menu, touch Setup > Tracks > Track
2.
Touch Record, Do Not Show or Record, Show On
If you select
Record, Show On
Map, a dashed line on the Map
page indicates your track.
To clear your current track:
On the Main Menu, touch Setup > Reset > Clear Current
Track > Yes.
Please visit
www.garmin.com
for additional documentation and
information.
May 2008
Part Number 190-00927-01 Rev. A
Printed in Taiwan
Route> >
Oregon
quick reference guide
Log.
Map.
series
™