Garmin GNS 430A Petunjuk Manual - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Tampilan Avionik Garmin GNS 430A. Garmin GNS 430A 6 halaman. Friendlypanels gps for microsoft fs9 & fsx
Juga untuk Garmin GNS 430A: Adendum Panduan Pilot (27 halaman), Adendum Panduan Pilot (4 halaman), Referensi Cepat (23 halaman), Adendum Panduan Pilot (22 halaman), Spesifikasi (2 halaman), Panduan Pengoperasian (27 halaman)

FDE PREDICTION PROGRAM

Your 400/500 Series Trainer software includes an FDE Prediction Program to meet the requirements for GPS as a primary means

of navigation for oceanic/remote operations (reference FAA Notice 8110.60). The oceanic ﬂ ight phase occurs on your 400/500

Series unit when you are more than 200 nautical miles from the nearest airport. All operators using the 400/500 Series unit as

primary means of navigation in oceanic/remote areas under FAR parts 91, 121, 125 and 135 must utilize the FDE Prediction

Program prior to conducting a ﬂ ight in these areas.

All operators must also utilize the FDE Prediction Program prior to navigation on U.S. RNAV routes, SIDs, and STARs if a

NOTAM indicates a GPS satellite (or satellites) is scheduled to be out-of-service (reference FAA AC 90-100).

FDE is an acronym for Fault Detection and Exclusion. The detection function refers to the capability to detect a satellite failure

which can affect navigation. The exclusion function refers to the capability to exclude one or more failed satellites and prevent them

from affecting navigation. The FDE function is built into the 400/500 Series unit and does not require pilot interaction. In contrast,

the FDE Prediction Program does require pilot interaction and must be used prior to oceanic/remote area ﬂ ights, and for U.S. RNAV

routes, SIDs, and STARs to predict FDE availability. The FDE Prediction Program allows you to specify the planned ground speed,

route space, and maximum allowable outage. When provided through NOTAM or other sources, satellites with known failures can

be excluded through the program's setup function.

To use the FDE Prediction Program, begin by entering the intended ﬂ ight plan into the 400/500 Series Trainer software. The

FDE Prediction Program uses this information to analyze satellite coverage along your intended route of ﬂ ight.

To create a ﬂ ight plan prior to using the FDE Prediction Program:

1. With the 400/500 Series Trainer running and the simulated

plan pages.

2. Click on the clockwise arrow of the unit's small right knob to display the list of saved ﬂ ight plans.

3. Click on the unit's MENU button, then click on the clockwise arrow of the unit's large right knob to highlight "Create New Flight

Plan?". Click on the unit's ENT button to begin creating a new ﬂ ight plan.

4. Use the unit's small and large right knobs to enter the identiﬁ er of the ﬁ rst ﬂ ight plan waypoint. Click on the unit's ENT button once

the identiﬁ er for the desired waypoint is displayed.

5. Repeat step #4 to enter each additional ﬂ ight plan waypoint, ending at the ﬁ nal destination airport.

Prior to running the FDE Prediction Program, the ﬂ ight plan created in the preceding steps needs to be activated. The FDE

Prediction Program only works with the currently active ﬂ ight plan.

To activate a saved ﬂ ight plan:

1. With the 400/500 Series Trainer running and the simulated

400/500 Series unit on, click on the unit's FPL button to display

the ﬂ ight plan pages.

2. Click on the clockwise arrow of the unit's small right knob to

display the list of saved ﬂ ight plans.

3. Click on the unit's small right knob to enable the cursor, then click

on the clockwise arrow of the large right knob to highlight the

desired saved route.

4. Click on the unit's MENU button, then click on the clockwise

arrow of the unit's large right knob to highlight "Activate Flight

Plan?". Click on the unit's ENT button to activate the ﬂ ight plan.

The active ﬂ ight plan page will be displayed (Figure 2).

Page 2

400/500 Series unit

on, click on the unit's FPL button to display the ﬂ ight

Figure 2. Active Flight Plan Page

190-00643-00 REV. A