Garmin GNS 530 Referensi Cepat - Halaman 10

Jelajahi secara online atau unduh pdf Referensi Cepat untuk Tampilan Avionik Garmin GNS 530. Garmin GNS 530 16 halaman. Supplement a21 to the airplane flight manual da 40 diamond com/nav/gps
Juga untuk Garmin GNS 530: Panduan Pilot (22 halaman), Petunjuk Manual (6 halaman), Adendum Panduan Pilot (27 halaman), Adendum Panduan Pilot (4 halaman), Brosur (1 halaman), Referensi Cepat (23 halaman), Adendum Panduan Pilot (22 halaman), Panduan Instalasi (14 halaman), Manual (35 halaman)

Halaman Cetak
Garmin GNS 530 Referensi Cepat
NAVCOM Page
Frequency
Category
Usage Restriction
Information
The NAVCOM Page provides a list of the airport communication and navigation
frequencies at your departure, enroute and arrival airports.
To Select a Frequency List for a Departure, Enroute or
Arrival Airport
1. Press the small right knob to activate the cursor.
2. Rotate the large right knob to place the cursor on the airport identifier
field (top line on the NAVCOM Page).
3. Rotate the small right knob to select the desired airport and press ENT.
To Scroll Through the List of Frequencies
1. Activate the cursor, if not already active, by pressing the small right
knob.
2. Rotate the large right knob to move the cursor through the list of
frequencies. If there are more frequencies in the list than can be displayed
on the screen, a scroll bar along the right-hand side of the screen will
indicate which part of the list is currently being displayed.
10
Auto-Tuning a Frequency from the NAVCOM Page
Departure, Enroute
1. Highlight the desired frequency by scrolling through the list of frequencies,
or Arrival Airport
as described in the previous procedure.
2. To place a frequency in the standby field of the COM or VLOC window,
highlight the desired frequency and press ENT.
Scroll Bar
Bottom Row Annunciators and Messages
Assigned
Frequency
CDI/RAIM Mode: Approach (APR), Terminal (TERM),
Enroute (ENR) or "0.30" (for VOR or localizer-based approaches)
Integrity Failure (INTEG) or Position
Warning (WARN) Annunciator
(RAIM protection limit failure)
OBS Mode: Suspend
(SUSP), OBS or blank (for
auto-sequencing)
Navigation Source:
GPS or VLOC
Message Annunciator:
Flashing (new message),
On, or blank (no message)
Page Annunciator (NAV/WPT/AUX/
NRST/FPL/VNAV/PROC), Waypoint
Alert ("NEXT DTK"), Turn Advisory
("TURN TO"), etc.