Garmin GNS 530 Manual - Halaman 28

Jelajahi secara online atau unduh pdf Manual untuk Tampilan Avionik Garmin GNS 530. Garmin GNS 530 35 halaman. Supplement a21 to the airplane flight manual da 40 diamond com/nav/gps
Juga untuk Garmin GNS 530: Panduan Pilot (22 halaman), Petunjuk Manual (6 halaman), Adendum Panduan Pilot (27 halaman), Adendum Panduan Pilot (4 halaman), Referensi Cepat (16 halaman), Brosur (1 halaman), Referensi Cepat (23 halaman), Adendum Panduan Pilot (22 halaman), Panduan Instalasi (14 halaman)

DA 40 AFM

IFR PROCEDURES

Once the direct-to or flight plan is confirmed, the whole range of instrument

procedures is available to you. Departures (SIDs), arrivals (STARs), non-precision

and precision approaches are stored within the NavData card and available using the

PROC (procedures) key.

To display the procedures page, press PROC.

The steps required to select and activate an approach, departure or arrival are

identical. In this Supplement, examples of the steps required to select an approach

are shown, but keep in mind the same process also applies to departures and arrivals.

To select an approach, departure or arrival:

Rotate the large right knob (13) to highlight the 'Select Approach?'

option (or 'Select Arrival?' / 'Select Departure?') from the procedures

page.

Press ENT to display a list of available procedures for the arrival

(when using approach or STARs) or departure (when using SIDs)

airport.

Rotate the small right knob (12) to select the desired procedure and

press ENT.

For approaches, a window appears to select the desired initial

approach fix (IAF) or a 'vectors' option to select just the final course

segment of the approach. Rotate the small right knob (12) to select

the desired option and press ENT. (The 'vectors' option extends the

final inbound course beyond the final approach fix, allowing you to

intercept the final course segment beyond its normal limits.)

Doc. # 6.01.01-E

Rev. 0

01 Dec 2001

Supplement A21

GNS 530

Page 9 - A21 - 27