AlkaViva Vesta H2 Adendum Manual

Jelajahi secara online atau unduh pdf Adendum Manual untuk Pengionisasi Udara AlkaViva Vesta H2. AlkaViva Vesta H2 2 halaman. Replacing the filter(s) in your h2 series ionizer
Juga untuk AlkaViva Vesta H2: Mulai Cepat Quide (2 halaman)

Halaman Cetak

Vesta H2, Athena H2, Melody II

Recommended Method for Manually Adjusting

While AutoAdjust automatically provides very fine real-time adjustments to the pulse width, you can also manually

adjust the power to best suit your unique water quality and desired performance requirements. By manually changing

the power-steps for each Alkaline and Acidic level, you can change the main power settings, making bigger and more

impactful changes in performance. There are 4 Power Levels (1 – 4). Power Level 1 is the lowest and Power Level

4 the highest. Follow this procedure to adjust the Power Levels:

Start with unit plugged in, water flow turned off.

2. Simultaneously press and hold the Alkaline 1 and Alkaline 2 buttons for 3—5 seconds, until the screen

looks like Fig. 1.

Press and release the Alkaline 2 button 6 times. The display should now look like Fig. 2

4. Each time the Acidic 1 button is pressed, the display will cycle through the alkaline and acidic levels,

first in Forward polarity and then in Reverse polarity. (refer to Fig. 3a, 3b, and chart 3c)

Manual Addendum

Power Settings

Fig. 1

Fig. 2

4/4/2017