Garmin GTN 635 Ralat - Halaman 2

Jelajahi secara online atau unduh pdf Ralat untuk Tampilan Avionik Garmin GTN 635. Garmin GTN 635 4 halaman. Gps/sbas navigation system as installed in cessna 172r
Juga untuk Garmin GTN 635: Petunjuk Aktivasi (46 halaman), Panduan Pengguna (20 halaman), Suplemen Manual (31 halaman), Panduan Pengguna (22 halaman), Panduan Penerbangan (49 halaman), Panduan Pilot (28 halaman)

Halaman Cetak
Garmin GTN 635 Ralat
When The Lat
Key Is Touched,
The Latitude
Hemisphere Value
Is Active For
Touch to Select
Hemisphere Value
NOTE: When editing values, turn the Large knob counter-clockwise to
backspace or move the cursor to the left.
GTN 725/750 Pilot's Guide
The following note was added on pages 4-1, 6-1, and 7-1:
NOTE: The Chart feature provides a digital representation of a paper chart
and provides no vertical or lateral course guidance. Flight Plan and Procedures
are separate from Charts, and do provide vertical and lateral course guidance
for the loaded route or procedure shown on the Flight Plan page. The term
"Chart Unavailable" means that the chart cannot be viewed on the Charts
due to either a chart not being published, or an error in the Chart database,
but does not preclude its availability or inclusion of the procedure in the Flight
Plan or Procedures portion of the system. The absence of a chart for a particular
Departure, Arrival, or Approach does not preclude its availability or inclusion in
2
190-01007-09_0A.indd 2
The Lat/Lon coordinate values will be highlighted. Touch the Lat or
2.
Lon key to toggle selection of the hemisphere values and highlight the
selected value.
Selection
Lat/Lon Coordinate Selection (GTN 7XX Example Shown)
3.
Touch the desired hemisphere keys to select the desired values. After
selecting the hemisphere value, the cursor will advance to the the first
character of the adjacent numeric value for selection. Even when the
hemisphere values are highlighted, touching a valid numeric key will
always place the cursor at the first numeric value. The Large knob may
also be used for cursor movement and characters are selected with the
Small knob.
4.
As each value is selected, the cursor will advance to the next character.
Touch the necessary key for the desired values.
5.
When finished with the Lat/Lon selections, touch the Enter key.
When finished with all selections, touch the Create key to create the
6.
new waypoint.
Garmin GTN Pilot's Guide Errata 1
Touch To Toggle Lat/Lon
Touch to Select
Numeric Values
190-01007-09 Rev. A
3/1/2011 2:21:13 PM