Garmin GHP 10 Panduan Pemilik - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem GPS Kelautan Garmin GHP 10. Garmin GHP 10 28 halaman. Autopilot system, addendum
Juga untuk Garmin GHP 10: Panduan Petunjuk Instalasi (48 halaman), Panduan Petunjuk Instalasi (26 halaman), Pernyataan Kesesuaian (1 halaman), Referensi (1 halaman), Catatan Konfigurasi (14 halaman)

route To

The autopilot steers the boat according to a route defined on your

chartplotter. Your GHC 10 must be connected to a NMEA 2000 or NMEA

0183 compatible chartplotter to use route to.

Following the route To Pattern

Before you can begin using route to, you must define a route on your

chartplotter. Refer to the owner's manual included with your chartplotter for

information on how to define a route.

From the heading screen, select Menu > GPS Steering > Route To.

The autopilot steers your boat according to the route defined on your

chartplotter, and the heading screen shows the distance to the next turn ➀

and distance off course

➋

GHC 10 Owner's Manual

➊

➋

The orbit pattern steers the boat in a continuous circle around the active

waypoint

(page

8). The size of the circle is defined by your distance from the

active waypoint when you begin the orbit pattern. There are no settings to

adjust.

Following the Orbit Pattern

1. From the heading screen, select Menu > GPS Steering > orbit >

engage.

2. Select an option:

• Select

to begin a clockwise turn.

• Select

to begin a counter-clockwise turn.

The autopilot steers your boat in a continuous circle around the active

waypoint, and the heading screen shows the direction of orbit

Powerboat Autopilot Operation

➊