Garmin GHP 10 Marine Autopilot System Panduan Memulai Cepat - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Sistem GPS Kelautan Garmin GHP 10 Marine Autopilot System. Garmin GHP 10 Marine Autopilot System 21 halaman. Tachometer reference
Juga untuk Garmin GHP 10 Marine Autopilot System: Panduan Petunjuk Instalasi (48 halaman), Panduan Petunjuk Instalasi (26 halaman), Referensi Teknis (42 halaman), Pernyataan Kesesuaian (1 halaman), Referensi (1 halaman)
Halaman Cetak
Orbit
The Orbit GPS pattern steers
the boat in a continuous circle
around the active waypoint.
The size of the circle is defined by your
distance from the active waypoint when
you begin the Orbit GPS pattern. There
are no settings to adjust.
Cloverleaf
The Cloverleaf GPS pattern
steers the boat to repeatedly
pass over an active waypoint.
When you begin the Cloverleaf pattern,
the autopilot drives the boat toward the
active waypoint and then begins the
Cloverleaf GPS pattern when
appropriate. The default settings create a
cloverleaf pattern that turns the boat at a
range of 300 m from the active
waypoint.
10
Search
The Search GPS pattern steers
the boat in increasingly larger
circles (a spiral pattern)
outward from the active waypoint. When
you begin the Search GPS pattern, the
autopilot drives the boat to the active
waypoint and then begins the pattern.
The default setting spaces the circles
20 m apart.
Route To
The autopilot steers the boat according
to a route defined on your Garmin
chartplotter or other compatible
GPS device.
To follow a GPS route:
1. On your chartplotter or GPS device,
create a route and begin navigating
the route according to the directions
provided with the chartplotter or the
GPS device.
2. On the GHC 10, from the Heading
screen, select
>
Route
To.
GHC 10 Quick Start Manual
Menu
>
GPS Steering