Garmin GPSMAP 17 Referensi Teknis - Halaman 7

Jelajahi secara online atau unduh pdf Referensi Teknis untuk Sistem GPS Kelautan Garmin GPSMAP 17. Garmin GPSMAP 17 30 halaman. Gps receiver/antenna
Juga untuk Garmin GPSMAP 17: Panduan Petunjuk Instalasi (16 halaman), Panduan Petunjuk Instalasi (12 halaman), Panduan Instalasi (16 halaman), Panduan Referensi (1 halaman), Panduan Petunjuk Instalasi (17 halaman), Panduan Petunjuk Instalasi (19 halaman), Pernyataan Kesesuaian (1 halaman), Spesifikasi Teknis (40 halaman), Panduan Memulai Cepat (16 halaman)

Halaman Cetak

Building a NMEA 2000 Network

The main communication channel of a NMEA 2000 network is a backbone to which your NMEA 2000 devices connect. Each NMEA 2000

device connects to the backbone with a T-connector. The NMEA 2000 backbone must be connected to power, and terminators must be installed

at both ends for the network to function correctly.

When you design a NMEA 2000 network, start by creating a diagram of the network. When creating the diagram, be as detailed as possible:

•

Include all of the devices you intend to connect to your network

•

Note the approximate location of the backbone and devices on your boat

•

Measure the distances between devices and the backbone, as well as the overall length of the backbone

•

Note the power consumption of each device (Load Equivalency Number)

Intelligent transducer

Female

terminator

Note: This diagram illustrates the NMEA 2000 data connections to each device or sensor. Some devices or sensors can be powered by the NMEA

2000 network; others may require a separate power connection. Consult the installation instructions for each device you connect to your NMEA 2000

network to be sure you supply power to the device appropriately.

When building a NMEA 2000 network, you must follow certain rules to make sure your NMEA 2000 network functions correctly. Be sure to

understand the following concepts:

•

Linear backbone construction

•

Power connection and distribution

•

Proper termination

(page

•

Cable length and device limits

Technical Reference for Garmin NMEA 2000 Products

Fuel sensor

Ignition or

in-line switch

Battery - 12 Vdc

Backbone extension cable

Sample NMEA 2000 Network

(page

Marine instrument

Fuse

Power cable

NMEA 2000 backbone

NMEA 2000 Fundamentals

Chartplotter

Drop cable

T-connector

Male

terminator