Garmin GPSMAP 17 Spesifikasi Teknis - Halaman 30

Jelajahi secara online atau unduh pdf Spesifikasi Teknis untuk Sistem GPS Kelautan Garmin GPSMAP 17. Garmin GPSMAP 17 40 halaman. Gps receiver/antenna
Juga untuk Garmin GPSMAP 17: Panduan Petunjuk Instalasi (16 halaman), Panduan Petunjuk Instalasi (12 halaman), Panduan Instalasi (16 halaman), Panduan Referensi (1 halaman), Referensi Teknis (30 halaman), Panduan Petunjuk Instalasi (17 halaman), Panduan Petunjuk Instalasi (19 halaman), Pernyataan Kesesuaian (1 halaman), Panduan Memulai Cepat (16 halaman)

Halaman Cetak

The status bit field represents a set of booleans described below:

Bit

The unit has ephemeris data for the specified satellite.

The unit has a differential correction for the specified satellite.

The unit is using this satellite in the solution.

This pattern is repeated for all 12 channels for a total of 12 X 7 bytes = 84 (0x54) bytes :

typedef

struct

{

cpo_sat_data

} cpo_all_sat_data

The RS-232 Packet for the Satellite Record looks like:

- 0x10

(DLE is first byte)

- 0x72

(Record ID – single byte)

- 0x54

(Number of data bytes – single byte)

- cpo_all_sat_data

- 0x##

(2's complement of the arithmetic sum of the bytes between the delimiters)

- 0x10

(DLE)

- 0x03

(ETX is last byte)

Position Record

- 0x10

(DLE is first byte)

- 0x33

(Position record identifier)

- 0x40

(Size of data)

- cpo_pvt_data

(See description below)

- one-byte checksum

(The addition of bytes between the delimiters should equal 0)

- 0x10

(DLE)

- 0x03

(ETX is last byte)

typedef struct

{

float

alt;

float

epe;

float

eph;

float

epv;

int

fix;

double

gps_tow;

double

lat;

190-00228-20

Meaning when bit is one (1)

GPS 16/17 Technical Specifications

Page 26

Rev. C