AEG PRO COMBI BS730410K Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Oven AEG PRO COMBI BS730410K. AEG PRO COMBI BS730410K 48 halaman.

Halaman Cetak

www.aeg.com

When the set time ends, an acoustic

signal sounds for two minutes.

and the time setting flash in the display.

The appliance deactivates.

4. Touch a sensor field or open the

oven door to stop the acoustic

signal.

5. Deactivate the appliance.

7.5 Setting the SET+GO

You can use the SET+GO function only

when the DURATION is set.

1. Set an oven function (or a

programme) and temperature (refer

to "Setting the oven function" and

"Changing the temperature").

2. Set the DURATION (refer to "Setting

the DURATION").

3. Touch

flashes in the display.

4. Touch

function.

The display shows

indicator. This indicator shows which

clock function is activated.

5. Touch a sensor field (apart from ON /

OFF) to start the SET+GO function.

7.6 Setting the MINUTE

MINDER

Use the MINUTE MINDER to set a

countdown (maximum 23 h 59 min). This

function has no effect on the operation

of the oven. You can set the MINUTE

MINDER at any time and also when the

appliance is off.

8. AUTOMATIC PROGRAMMES

WARNING!

Refer to Safety chapters.

There are 25 automatic programmes.

Use an automatic programme or recipe

8.1 Automatic programmes

Programme number

again and again until

to set the SET+GO

and

with an

Programme name

VEGETABLES, TRADITIONAL

1. Touch

symbol

and "00" flash in the display.

2. Use

MINDER. First you set the seconds,

then the minutes and the hours.

3. Touch

starts automatically after five

seconds.

When the set time ends, an acoustic

signal sounds for two minutes and 00:00

and

flash in the display.

4. Touch a sensor field or open the

oven door to stop the acoustic

signal.

7.7 Setting the Time delay

function

The DURATION

used at the same time, if the appliance is

to be switched on and off automatically

later. In this case, first set the DURATION

and then the END

to "Setting the DURATION" and

"Setting the END" ).

When the Time delay

function is activated, the

display shows a static

symbol of the oven function,

dot shows which clock

function is on in the Clock /

residual heat display.

when you do not have the knowledge or

experience on how to prepare a dish.

The display shows the shelf position and

the default cooking times for all

automatic programmes.

to set the MINUTE

or the MINUTE MINDER

and END

function (refer

with a dot and

. The

can be