Garmin GPSMAP 640 Panduan Referensi Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Sistem GPS Kelautan Garmin GPSMAP 640. Garmin GPSMAP 640 2 halaman. Garmin gps receiver user manual
Juga untuk Garmin GPSMAP 640: Petunjuk Instalasi (2 halaman), Pernyataan Kesesuaian (6 halaman), Manual (24 halaman), (Panduan Referensi Cepat) (2 halaman), Panduan Referensi Cepat (Bahasa Italia) (2 halaman)

Halaman Cetak

Garmin GPSMAP 640 Panduan Referensi Cepat

Mount Your GPSMAP 620/640

1. Flip up the locking tab on top of the mounting bracket.

2. Fit the bottom of the device into the cradle.

3. Tilt the device back until it stops.

4. Flip down the locking tab to hold the device in the mounting

bracket.

To remove the GPSMAP 620/640 from the mounting

bracket:

1. Flip up the locking tab on top of the mounting bracket.

2. Tilt the device forward, and lift it out of the mounting bracket.

Powering the GPSMAP 620/640 On and Off

Power on the GPSMAP 620/640:

• If the mounting bracket on your boat or in your car is connected to power, the device powers

on when you place it in the mount.

• To power on the device manually, press and hold the

Power

appears on the screen.

Power off the GPSMAP 620/640:

• When you remove the device from the mounting bracket, you will be prompted to continue on

battery power. Touch

Turn Off

to power off the device.

• To power off the device manually, press and hold the

Power

Note: If you manually power off the device while it is connected to a power source, it will continue

to charge the battery

Inserting a Secure �igital (S�) Card

1. Turn the locking ring and remove the battery pack. The SD card slot

is in the bottom of the battery compartment, on the opposite side

from the battery contacts.

2. Place an SD card into the opening with the label showing and with

the SD card contacts facing away from the battery contacts.

3. Slide the SD card into the SD card slot, and press until it clicks and

locks in place.

4. Insert the battery pack.

To remove an S� card:

1. Remove the battery.

2. Press in on the SD card until it clicks and releases from the SD card

slot.

3. Remove the SD card.

Marine Mode: Acquiring Satellites

1. Go outdoors to an open area, away from tall buildings and trees.

2. Turn on your GPSMAP 620/640.

Acquiring satellite signals can take a few minutes. The

When at least one of the bars is green, your GPSMAP 620/640 has acquired satellite signals.

Now you can select a destination and navigate to it.

Marine Mode: Understanding Your GPSMAP 620/640

Placing the

Usage mode. A boat icon represents

GPSMAP 620/640 in the

➊

marine mode, and a car icon represents

Mounting Bracket

automotive mode. Touch this icon to

change modes.

satellite strength (only available

➋

on the GPSMAP 640 when using an

optional GXM 40 XM antenna).

key until the Garmin logo

GPS satellite strength.

➌

Battery status.

➍

Current time.

➎

Home screen categories and actions. Touch an icon to view the associated menu or

➏

perform the associated action.

key until the unit powers off.

Marine Mode: Navigating �irectly to a �estination

1. From the Home screen, touch

2. On the Navigation chart, touch the place you would like to navigate to.

Note: Touch

the map.

3. When the

pointer icon is on the location you want to navigate to, touch

To.

4. Follow the magenta line drawn between your current location and your destination.

Navigate with caution; avoid land masses and obstacles while following the line to your

destination.

Direction to

destination

Position and

heading

Inserting an S� Card

bars indicate satellite strength.

➊

➋ ➌➍ ➎

➏

Marine Mode: Home screen

Charts

Navigation

Chart.

and

to zoom in and out. Touch anywhere on the chart and drag it to pan

Navigate To

Navigation

information

Navigating �irectly to a �estination

Marine Mode: Saving Your Current Location

To save a location, such as your marina or a good fishing spot, mark it as a waypoint.

1. From the Home screen, touch Mark.

2. If you want to name the waypoint, touch

Edit Waypoint

to enter a name other than the number assigned to the waypoint by default.

Marine Mode: Navigating �irectly to a Saved Location

1. From the Home screen, touch

Where To?

> Waypoints.

2. Touch the waypoint you want to navigate to.

3. Touch

Navigate To

To.

4. Follow the magenta-highlighted line drawn between your current location and your destination.

Navigate with caution; avoid land masses and obstacles while following the line to your

destination.

Marine Mode: Using Man Overboard (MOB) Waypoints

Use a Man Overboard (MOB) waypoint to both create a waypoint with an international MOB

symbol ( ) and immediately begin navigating to the MOB waypoint with a direct course.

To mark an MOB waypoint:

1. Touch

Mark

in the top-left corner of any screen except the Home screen. This immediately

marks your current position as a waypoint.

2. Touch

Man

Overboard. This designates the waypoint as an MOB waypoint and begins

navigation automatically.

Note:

You can also touch Man overboard

on the Home screen to mark a MOB waypoint and

immediately begin navigation.

Marine Mode: Stopping Navigation

1. While navigating, from the Navigation chart, touch Menu.

2. Touch

Stop

Navigation.

Note: You can also stop navigation from the Where To? screen.

Marine Mode: Adjusting the Backlight

1. From any screen, press and quickly release the

2. Touch and drag the backlight slider bar to the left to decrease the brightness, and drag it to

the right to increase the brightness. The box to the right of the backlight slider bar shows the

backlight level as a percentage.

S ee the Important Safety and Product Information guide in the product box for product warnings and other

important information.

Please visit www.garmin.com for additional documentation and information.

November 2008

Part Number 190-01006-01 Rev. A

> Name. Use the on-screen keyboard

Power

key.

Printed in Taiwan