Garmin 010-02346-00 Panduan Petunjuk Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Peralatan Kelautan Garmin 010-02346-00. Garmin 010-02346-00 19 halaman.

Speaker System Wiring Using a Line Out

This diagram illustrates a system installation with an external amplifier and subwoofer connected to zone 2 on

the stereo using a line out. You can connect an amplifier and subwoofer to any or all of the available zones on

the stereo.

NOTE: You can connect speakers to the speaker wires for the internal stereo amplifier while using the line out

on zones 1 and 2, although adjusting the volume affects both the speakers connected to the internal amplifier

and the line out. This may result in uneven volume levels.

Zone 1 speakers

Water-tight connection

Zone 2 speakers

Amplifier-on signal wire

You must connect this wire to each amplifier connected to a zone line out.

A connected amplifier must use the same ground (-) as the stereo for this signal wire to function

correctly.

Powered amplifier connected to the zone 2 line out

Zone 2 line out and subwoofer out

Each subwoofer cable provides a single mono output to a powered subwoofer or subwoofer amplifier.

You may need to use an RCA splitter to connect this to an amplifier.

Subwoofer

Connecting a SiriusXM Tuner Module

This device is compatible with a SiriusXM SXV300 or newer vehicle tuner module.

1 If you have already connected a USB source, disconnect it from the stereo.

2 Connect the cable from the SiriusXM tuner module to the SXM TUNER port on the back of the stereo.

3 Follow the instructions provided with the SiriusXM tuner module and antenna to complete the SiriusXM

installation.

4 If necessary, reconnect the USB source.

5 Complete the stereo installation.

Apollo MS-WB670 Installation Instructions