Garmin AIS 600 Petunjuk Manual - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Peralatan Kelautan Garmin AIS 600. Garmin AIS 600 13 halaman. Automatic identification system (ais) class b transponder device
Juga untuk Garmin AIS 600: Referensi Teknis (42 halaman), Pernyataan Kesesuaian (6 halaman)

Halaman Cetak
Garmin AIS 600 Petunjuk Manual
AIS 600 Wiring Layout: AIS 600 Connected to a Garmin Chartplotter through
GA 0 GPS antenna*
(included)
RF cable to VHF antenna
(not included)
AIS 600 transceiver box
Silent-mode switch
(optional - not included)
SRM switch
(optional - not included)
See
page 8
for silent mode and
Safety-Related Message (SRM)
wiring assignments
Notes:
* The AIS 600 must be connected to the included GA 30 GPS antenna. The AIS 600 does not share GPS information with any other devices
on the boat. If you have a chartplotter on your boat, it must receive GPS information from a separate antenna, such as a GPS 17x.
** The AIS 600 does not need to be installed alongside a VHF radio, but they can share the same VHF antenna if they are both installed on
your boat.
*** The listed wire colors are for the NMEA 0183 Port 1 input on a Garmin GPSMAP 4000/5000/6000/7000 series chartplotter. Refer to the
installation instructions provided with your Garmin chartplotter if you want to wire the AIS 600 to a different model of Garmin chartplotter or to
a different NMEA 0183 port on a GPSMAP 4000/5000/6000/7000 series chartplotter.
If you are connecting the AIS 600 to a non-garmin chartplotter, see
4
NMEA 0183
RF interconnect cable
(included)
VHF radio**
(optional - not
included)
1 or 4 Vdc
page 8
Wire color [function]
Wire color [function]***
Gray [Tx A (+)]
White [Rx A (+)]
>
Pink [Tx B (-)]
Orange/White [Rx B (-)]
>
Yellow
Orange
[power toggle]
[power toggle]
Chartplotter power
Garmin NMEA 018-
compatible chartplotter
(optional - not included)
for detailed wiring assignments.
>
>
AIS 600 Instructions