Garmin Echo 100 Panduan Pemilik - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Peralatan Kelautan Garmin Echo 100. Garmin Echo 100 13 halaman. Flush mount template
Juga untuk Garmin Echo 100: Panduan Petunjuk Instalasi (6 halaman), Templat (1 halaman), Panduan Pemilik (10 halaman), Panduan Pemilik (21 halaman), Panduan Pemilik (20 halaman)

Halaman Cetak

Using the echo 100 and echo 150

Setting the Battery Voltage Alarm

You can set an alarm to sound when the battery reaches a specified low

voltage.

1. From the Sonar screen, select MENU > Setup > Alarms > Battery >

On.

2. Select the low battery voltage that triggers the alarm.

The alarm setting appears on the Alarms screen.

Setting Fish Alarms

You can set an alarm to sound when the device detects a suspended target.

From the Sonar screen, select MENU > Setup > Alarms > Fish > On.

Setting the Sonar Scroll Speed

You can set the rate at which the sonar scrolls from right to left.

Use a higher scroll speed to see more detail, especially while moving or

trolling. Use a lower scroll speed to display the sonar information on the

screen longer.

1. From the Sonar screen, select MENU > Setup > Sonar > Scroll.

2. Select a scroll speed.

Selecting a Frequency for the echo 150

When using a dual frequency transducer, you can select a frequency for the

echo 150 Sonar screen when using a dual frequency transducer.

NOTE: The echo 100 operates only at 200 kHz.

You can show data from a 200 kHz sonar signal or data from a 77 kHz sonar

signal. The 200 kHz frequency shows better detail, has a narrower beam, and

is typically used in shallower waters. The 77 kHz frequency penetrates deep

water more effectively and has a wider beam, so it can be used to cover a

larger area.

1. From the Sonar screen, select MENU > Setup > Sonar > Frequency.

2. Select a frequency.

Configuring the Appearance of Suspended Targets

You can set how the sonar interprets suspended targets.

1. From the Sonar screen, select MENU > Setup > Sonar > Fish ID.

2. Select an option:

• To show suspended targets as symbols, select

• To show suspended targets as symbols with target depth information,

select

• To show suspended targets as symbols with background sonar

information, select

• To show suspended targets as symbols with background sonar

information and target depth information, Select

echo 100 and echo 150 Owner's Manual