Garmin FUSION XS Series Panduan Petunjuk Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Peralatan Kelautan Garmin FUSION XS Series. Garmin FUSION XS Series 13 halaman. Marine wake tower speakers
Juga untuk Garmin FUSION XS Series: Panduan Petunjuk Instalasi (11 halaman), Panduan Petunjuk Instalasi (6 halaman), Petunjuk Instalasi (4 halaman), Panduan Petunjuk Instalasi (6 halaman)

Mounting Considerations

Selecting the correct mounting location is critical to optimize the performance of the audio system. This

FUSION subwoofer is designed to perform in the widest possible range of mounting locations, but the more you

plan the installation, the better the subwoofer sound will be.

• The audio system must be turned off before making any connections. Failure to do so could result in

permanent damage to the audio system.

• You should protect all terminals and connections from grounding and from each other. Failure to do so could

result in permanent damage to the audio system and voids the product warranty.

• You should protect the wires from sharp objects and always use rubber grommets when wiring through

panels.

• The mounting location must avoid potential obstacles, such as fuel and hydraulic lines and wiring.

• The mounting location must provide sufficient clearance for the mounting depth of the subwoofer as

specified in the side view drawings and the specifications.

• When possible, the area behind each subwoofer should be enclosed.

• To avoid interference with a magnetic compass, the subwoofer should not be installed closer to a compass

than the compass-safe distance value listed in the product specifications.

• You should select a flat mounting surface for the best seal.

• For better bass performance, the subwoofer should be mounted in an area that provides just enough room

behind the subwoofer. Too small an area restricts bass, and too large an area compromises bass

performance. Refer to the specifications for optimum volume recommendations.

• When a subwoofer is not exposed to the outside environment, a better bass performance can be achieved

using an enclosure that has a ported design.Theile Small parameters are provided in the specifications to

assist with enclosure and port design.

• If you intend to mount the subwoofer outside the boat, follow these considerations.

◦ When mounted correctly, the subwoofer is rated IP65 for protection in the marine environment from the

front of the subwoofer. Water exposure and damage to the rear of the subwoofer voids the warranty.

◦ The subwoofer must be mounted in a location well above the waterline, where it is not submerged.

◦ The subwoofer must be mounted in a location where it cannot be damaged by docks, pilings, or other

pieces of equipment.

◦ The subwoofer should be mounted in a sealed enclosure, especially if it is exposed to wash down. A port

or vent may allow water to collect in the enclosure and damage the subwoofer.

XS Series Subwoofer Installation Instructions