Garmin GHC 10 Panduan Pemilik - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Peralatan Kelautan Garmin GHC 10. Garmin GHC 10 26 halaman. Flush moun template
Juga untuk Garmin GHC 10: Panduan Memulai Cepat (21 halaman), Pernyataan Kesesuaian (1 halaman), Templat (1 halaman), Petunjuk (2 halaman)
Halaman Cetak
Powerboat Autopilot Operation
Circles Pattern
The circles pattern steers the boat in a continuous circle, in a specified
direction, and at a specified time interval.
setting Up the Circles Pattern
You can adjust the time the autopilot takes to complete the circle. The
default value creates a circle that takes 5 minutes to complete.
1. From the heading screen, select Menu > Pattern Steering > Circles >
Time.
2. Select
or
3. Select Done.
Following the Circles Pattern
1. From the heading screen, select Menu > Pattern Steering > Circles.
2. Select engage.
3. Select an option:
• Select
to begin a clockwise turn.
• Select
to begin a counter-clockwise turn.
6
to set the time.
The autopilot follows the circles pattern, and the heading screen shows
the time of the circles pattern ➀.
The autopilot positions the boat so that the circle pattern is centered on
the location at which you engage the pattern.
TIP: To quickly resume a pattern after you make a heading adjustment with
the helm or the soft keys
(page
3), select the center soft key twice.
➀
GHC 10 Owner's Manual