Garmin GPS 17x NMEA 2000 Panduan Petunjuk Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Peralatan Kelautan Garmin GPS 17x NMEA 2000. Garmin GPS 17x NMEA 2000 48 halaman. High sensitivity gps antenna
Juga untuk Garmin GPS 17x NMEA 2000: Panduan Konfigurasi (2 halaman), Pernyataan Kesesuaian (1 halaman), Referensi Teknis (42 halaman), Informasi Keselamatan Penting (48 halaman)

Halaman Cetak

Garmin GPS 17x NMEA 2000 Panduan Petunjuk Instalasi

Pole Mounting the GPS 17x Antenna

With the pole-mount adapter attached to the GPS 17x, you can install the GPS 17x on a

standard 1 in. OD pipe-threaded-pole marine mount (14 threads per inch—not included). You

can run the NMEA 2000 cable through the pole or outside the pole.

To mount the GPS 17x with the cable run outside the pole:

1. Route the NMEA 2000 drop cable through the pole-mount adapter, and place the cable in

the vertical slot along the base of the pole-mount adapter.

2. Thread the pole-mount adapter onto a standard 1 in. OD pipe-threaded-pole marine mount

(14 threads per inch—not included). Do not overtighten the adapter.

3. Connect the NMEA 2000 drop cable to the GPS 17x antenna.

4. Place the GPS 17x antenna on the pole-mount adapter

twist it clockwise to lock it in place

5. Secure the antenna to the adapter with the included

M3 set screw

➌

6. (Optional) With the GPS 17x installed on the pole

mount, fill the remaining gap in the vertical cable

slot with a marine sealant.

7. Attach the marine mount to the boat if it is not

already attached.

8. Route the cable away from sources of electronic

interference, and connect it to your NMEA 2000

network.

To mount the GPS 17x with the cable run

through the pole:

1. Position a standard 1 in. OD pipe-threaded-pole

marine mount (14 threads per inch—not included) in

the preferred location, and mark the approximate center of the pole.

2. Drill a hole using a

3. Fasten the marine mount to the boat.

4. Thread the pole-mount adapter onto the pole. Do not overtighten the adapter.

5. Route the NMEA 2000 drop cable through the pole and connect it to the GPS 17x antenna.

6. Place the GPS 17x antenna on the pole-mount adapter

place

➋

7. Secure the antenna to the adapter with the included M3 set screw

8. (Optional) With the GPS 17x installed on the pole mount, fill the vertical cable slot with a

marine sealant.

9. Route the cable away from sources of electronic interference, and connect it to your NMEA

2000 network.

Under-deck-mounting the GPS 17x Antenna

The GPS 17x can be mounted under a fiberglass surface with the included adhesive pads. The

GPS 17x will not acquire satellite signals through metal—you can only use the under-deck

mount under a fiberglass surface.

1. Determine the location on the

fiberglass surface where you want to

mount the GPS 17x.

2. Place the adhesive pads on the

under-deck mounting bracket.

GPS 17x NMEA 000 Installation Instructions

➋

in. (19 mm) drill bit for the cable to pass through.

Mounting

surface

Adhesive pads

and

➊

Pole-mount

adapter

Vertical cable

slot

and twist it clockwise to lock it in

➊

GPS 17x

antenna

Under-deck-

mounting bracket

➋

➌

GPS 17x

➌

antenna