Garmin GPSMAP 526/526s Petunjuk Manual - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Peralatan Kelautan Garmin GPSMAP 526/526s. Garmin GPSMAP 526/526s 28 halaman. Flush mount template
Juga untuk Garmin GPSMAP 526/526s: Panduan Petunjuk Instalasi (12 halaman), Panduan Referensi (2 halaman), Referensi Teknis (42 halaman), Informasi Keselamatan Penting (48 halaman), Templat (2 halaman)

3. Install the unit in the opening (see Figure 2):

•

Place the unit housing in the recently cut hole in the mounting surface.

•

Slide the tension mount brackets onto the hex bolts and secure them with the four wing nuts.

•

Tighten the four wing nuts to secure the unit housing to the mounting surface. Be careful not to overtighten.

•

If you did not do so in step 2, connect the wiring harness to the unit, then slide the unit into the unit housing until it snaps in place.

Assembled unit and

flush mount hardware

NOTE: You must connect the wiring harness to the boat's power supply, GPS antenna, XM antenna (if applicable), and transducer (if applicable)

per the installation instructions included with the unit.

Tension mount brackets

Figure 2

Wing nuts