AEG FAVORIT 2807 Panduan Petunjuk Pengoperasian - Halaman 33

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Mesin pencuci piring AEG FAVORIT 2807. AEG FAVORIT 2807 40 halaman.

Installation

Adjusting the worktop

You can move the worktop forward or

backward by 25 mm in order to align the

machine with other kitchen units.

Simply unscrew the two rear retaining

screws, move the top to the required

position and then retighten the screws.

Fitting under a counter

By removing the machine's worktop, you can install it under a close fitting

sink unit or a pre-existing top, providing the dimensions of the recess

correspond to those shown in the picture.

Proceed as follows:

- Remove the machine's worktop by

unscrewing the two rear retaining

screws, pull from the front and slide

out the rear slots, lifting the worktop.

- Insert the machine after adjusting

height and levelling with the adjustable

feet. When inserting the machine,

ensure that the water inlet and drain

hoses are not kinked or squashed.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on the

levelling spacers on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet

until the machine is perfectly level.

IN26

(kitchen worktop or sink)

IN05