AEG FAVORIT 3A Petunjuk Pengguna - Halaman 30

Jelajahi secara online atau unduh pdf Petunjuk Pengguna untuk Mesin pencuci piring AEG FAVORIT 3A. AEG FAVORIT 3A 48 halaman. Aeg dishwasher
Juga untuk AEG FAVORIT 3A: Petunjuk Pengguna (40 halaman), Petunjuk Pengguna (44 halaman)

Halaman Cetak

Operating Instructions

Cancelling the start delay:

As long as the programme has not started you are still able to cancel

the start delay. Continue pressing the DELAY TIMER button until the

length of the selected programme appears in the multi-display. The

selected programme will begin immediately.

Changing the programme after the start delay has been set:

As long as the programme has not started, you can still change the pro-

gramme set by pressing a programme button.

1. Press the button for the new programme and hold it down.

First the indicator for the programme that has just been selected will

flash.

After several seconds only the indicator for the new programme will be

flashing.

2. Release the programme button.

The newly selected programme will start automatically following a

countdown of the hours set.

Load Sensing – Sensor Logic

If a wash programme is started even though there are only a few dishes

in the upper and/or lower basket, an intelligent electronic system

adjusts the amount of water and the duration of the wash programme

to the number of dishes. By this means it is possible to wash only a few

dishes quickly and economically. At half load (6 place settings), up to

2 litres of water and 0.2 kWh of electricity are saved.