AEG FAVORIT 40650 Informasi Pengguna - Halaman 20

Jelajahi secara online atau unduh pdf Informasi Pengguna untuk Mesin pencuci piring AEG FAVORIT 40650. AEG FAVORIT 40650 40 halaman. Aeg dishwasher
Juga untuk AEG FAVORIT 40650: Informasi Pengguna (40 halaman)

Halaman Cetak

Starting a dishwashing cycle

1. Check that the spray arms can turn freely.

2. Turn the water tap on fully.

3. Close the door.

4. Press the ON/OFF button.

5. Select the desired cycle.

The programme display lights up. One or two lights will flash in the

programme progress display.

The selected cycle will begin after approximately 3 seconds.

If END flashes in the programme progress display after the cycle has

started, please read the section "What to do if...".

Interrupting or aborting a dishwashing cycle

Only interrupt a dishwashing cycle that is in progress if it is absolutely

necessary.

Interrupting the dishwashing programme by opening the dishwash-

er door

Hot steam may escape when the door is opened. There is a risk of scald-

ing.

1. Open the door carefully. The dishwashing cycle will stop.

2. Close the door. The cycle will continue.

Aborting the dishwashing cycle

1. Press function buttons 2 and 3 and keep them pressed.

The programme display for the current cycle will flash for several sec-

onds and then go out.

2. Release the function buttons. The dishwashing cycle has been can-

celled.

3. If you want to start a new cycle, check whether there is any detergent

in the dispenser.

Turning off the dishwasher will only interrupt a selected dishwashing

cycle, not cancel it. The cycle will recommence after turning the dish-

washer back on again.