Garmin TT 10 Panduan Pemilik - Halaman 19
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Produk Perawatan Hewan Peliharaan Garmin TT 10. Garmin TT 10 26 halaman.
Juga untuk Garmin TT 10: Petunjuk Penggantian Baterai (2 halaman), Panduan Pengguna (5 halaman)
Halaman Cetak
Device Information
Viewing Device Information
You can view the unit ID, software version, and license
agreement.
Select Setup > About.
Updating the Software
Before you can update the handheld device or collar software,
you must connect the handheld device
(page
16) to the computer.
You must update the software on the handheld device and
collar separately.
NOTE: Updating the software does not erase any of your data
or settings.
1
Go to www.garmin.com/products/webupdater.
2
Follow the on-screen instructions.
Device Care
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Never use a hard or sharp object to operate the touch screen,
or damage may result.
Avoid chemical cleaners and solvents that can damage plastic
components.
Cleaning the Device
1
Wipe the device with a cloth dampened with a mild detergent
solution.
2
Wipe it dry.
Cleaning the Screen
Before you can clean the screen, you should have a soft, clean,
lint-free cloth and water, isopropyl alcohol, or eyeglass lens
cleaner.
Apply the liquid to the cloth, and gently wipe the screen with the
cloth.
Specifications
Alpha 100 Handheld Device Specifications
Battery type
Battery life
Operating temperature range From -4°F to 140°F (from -20°C to 60°C)
Charging temperature range From 32°F to 113°F (from 0°C to 45°C)
Long-term storage
temperature range
Water resistance
VHF wireless range
ANT+ Low power wireless
range
TT 10 Dog Collar Device Specifications
Battery type
Rechargeable, replaceable lithium-ion
Battery life
20 hours with a 2.5-second update rate; 40
hours with a 2-minute update rate
Operating temperature
From -4°F to 140°F (from -20°C to 60°C)
range
Charging temperature
From 32°F to 113°F (from 0°C to 45°C)
range
Short-term storage
From -4°F to 104°F (from -20°C to 40°C)
temperature range
Device Information
(page
16) or the collar
NOTICE
Rechargeable, replaceable lithium-ion
Up to 20 hours
From 32°F to 77°F (from 0°C to 25°C)
IEC 60529 IPX7
Up to 9 miles
About 10 ft. (3 m)
Long-term storage
From -4°F to 77°F (from -20°C to 25°C)
temperature range
Water resistance
Up to 10 meters
Battery Information
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
Do not use a sharp object to remove batteries.
Contact your local waste disposal department to properly
recycle the batteries.
Long-Term Storage
The normal long-term decrease in the charging capacity of
lithium-ion batteries can be accelerated by exposure to elevated
temperatures. Storing a fully charged device in a location with a
temperature outside the long-term storage temperature range
can significantly reduce its recharging capacity. See
When you do not plan to use the handheld device for several
months, the battery should be removed. Stored data is not lost
when the battery is removed.
When you do not plan to use the collar for several months, the
battery should be charged to about 50%. The device should be
stored in a cool, dry place with temperatures are around the
typical household level. After storage, the collar should be fully
recharged before use.
Maximizing the Battery Life
You can do several things to extend the life of the batteries in
the handheld device and collar.
• Reduce the backlight brightness
• Reduce the backlight timeout
• Select a longer duration for your handheld update rate
(page
16).
• Turn off the transmitter
• Use battery save mode
• Decrease the map drawing speed
• Put the dog collar device into rescue mode
conserve the collar battery.
• Extend the duration for the collar update rate
conserve the collar battery.
Adjusting the Backlight Brightness
Extensive use of screen backlighting can significantly reduce
battery life. You can adjust the backlight brightness to maximize
the battery life.
NOTE: The backlight brightness may be limited when the
battery is low.
1
Select the Power key.
2
Use the slider to adjust the backlight level.
The device may feel warm when the backlight setting is high.
Adjusting the Backlight Timeout
You can decrease the backlight timeout to maximize the battery
life.
1
Select Setup > Display > Backlight Timeout.
2
Select an option.
WARNING
CAUTION
NOTICE
page
(page
15).
(page
15).
(page
16).
(page
16)
(page
16).
(page
(page
15.
9) to
16) to
15