LG 230/208V Panduan Servis - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Servis untuk Ponsel LG 230/208V. LG 230/208V 35 halaman. Lg service manual room air conditioner

2.3.5 POWER CORD

1. Remove the control box. (Refer to section 2.1.2)

2. Disconnect the grounding screw from the control

box.

3. Disconnect 2 receptacles.

4. Remove a screw which fastens the clip cord.

5. Separate the power cord from the control box.

(See Fig. 12)

6. Re-install the component by referring to the

removal procedure, above.

(Use only one ground-marked hole

connection.)

7. If the supply cord of this appliance is damaged, it

must be replaced by the special cord.

(The special cord means the cord which has the

same specification marked on the supply cord

fitted to the unit.)

1. Remove the escutcheon.

2. Remove the two knobs.

3. Remove the 2 screws which fasten P.C.B. cover.

4. Disconnect all the leads which connected to the

P.C.B.

5. Remove the two screws which fasten the P.C.B.

board.

6. Re-install the components by referring to the

removal procedure, above.

for ground

Figure 12

Figure 13

—13—