Brother DCP 8060 Panduan Pengaturan Cepat - Halaman 21
Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Semua dalam Satu Printer Brother DCP 8060. Brother DCP 8060 37 halaman. Windows vista
Juga untuk Brother DCP 8060: Panduan Pengaturan Cepat (24 halaman), Setup Manual (23 halaman)
Halaman Cetak
■ After restarting the computer, the
Installation Diagnostics will run
automatically. If the installation is
unsuccessful, the installation results
window will be shown. If the Installation
Diagnostics shows a failure, please follow
the on-screen instruction or read on-line
help and FAQs in Start/All Programs
(Programs)/Brother/MFL-Pro Suite
DCP-XXXX (where XXXX is your model
name).
■ Once you are sure that you can print after
the installation, restart your Firewall
software.
■ Firewall settings on your PC may reject the
necessary network connection for Network
Scanning.
Follow the instructions below to configure
your Windows Firewall. If you are using a
personal Firewall software, see the User's
Guide for your software or contact the
software manufacturer.
®
■ Windows
XP SP2 users:
1 Click the Start button, Control Panel
and then Windows Firewall.
Make sure that Windows Firewall on the
General tab is set to On.
2 Click the Advanced tab and Settings...
button.
3 Click the Add button.
4 To add port 54925 for network scanning,
enter the information below:
1) In Description of service: - Enter any
description, for example "Brother
Scanner" (without the inverted
commas).
2) In Name or IP address (for example
192.168.0.12) of the computer
hosting this service on your
network: - Enter "Localhost" (without
the inverted commas).
3) In External Port Number for this
service: - Enter "54925" (without the
inverted commas).
4) In Internal Port number for this
service: - Enter "54925" (without the
inverted commas).
5) Make sure UDP is selected.
6) Click OK.
1
2
3
4
5 If you still have trouble with your network
connection, click the Add button.
6 To add port 137 for network scanning,
enter the information below:
1) In Description of service: - Enter any
description, for example "Brother Port"
(without the inverted commas).
2) In Name or IP address (for example
192.168.0.12) of the computer
hosting this service on your
network: - Enter "Localhost" (without
the inverted commas).
3) In External Port Number for this
service: - Enter "137" (without the
inverted commas).
4) In Internal Port number for this
service: - Enter "137" (without the
inverted commas).
5) Make sure UDP is selected.
6) Click OK.
7 Make sure that the new settings are
added and are checked, and then click
OK.
■ For network installations, the Repair
MFL-Pro Suite selection from the main
menu is not supported.
■ Network Scanning, Network Remote Setup,
Network PC-FAX Receiving are not
supported in Windows NT
■ For configuration of advanced network
functions such as LDAP and Scan to FTP,
see the Software and Network Users
Guides located on the CD-ROM.
5
®
4.0.
19