Brother DCP 8060 Setup Manual - Halaman 10
Jelajahi secara online atau unduh pdf Setup Manual untuk Semua dalam Satu Printer Brother DCP 8060. Brother DCP 8060 23 halaman. Windows vista
Juga untuk Brother DCP 8060: Panduan Pengaturan Cepat (37 halaman), Panduan Pengaturan Cepat (24 halaman)
Halaman Cetak
STEP 2
Installing the Driver & Software
4
Click Finish to restart your computer. After
restarting the computer, you must be logged on
with Administrator rights.
Note
After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation results
window will be shown. If the Diagnostics shows a
failure, please follow the on-screen instructions or
read the on-line help and FAQs in
Start/All Programs/Brother/XXX-XXXX (where
xxx-xxxx is your model name).
The MFL-Pro Suite has been installed
completely.
8
For MFC-3360C users
1
Insert the USB cable to the USB port marked
with a
symbol. You will find the USB port
next to the handset cord socket as shown
below.
2
Connect the USB cable to your computer.
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
• Make sure you use a USB 2.0 cable that is no
longer than 6 feet long (2 meters).
3
Turn on the machine by connecting the power
cord.
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another, please wait for a
while.
Improper Setup
DO NOT try to cancel any of the screens during
this installation.
®
Windows