Brother DCP-6690CW Panduan Pengaturan Cepat - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Semua dalam Satu Printer Brother DCP-6690CW. Brother DCP-6690CW 43 halaman.

Wired Network

Carefully guide the network cable to the trench

as shown below, following the trench around

and toward the back of the machine. Then,

connect the cable to your network.

Note

If both USB and LAN cables are being used,

guide both cables through the trench with one on

top of the other.

Important

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Gently close the scanner cover using the finger

holds on both sides of it.

WARNING

Be careful not to trap your fingers under the

scanner cover.

Always use the finger holds provided on both

sides of the scanner cover when opening and

closing it.

Connect the power cord

Connect the power cord.

Important

If you have previously set up your machine for

a wireless network and then want to set it up

on a wired network, you should check that the

machine's Network I/F is set to Wired LAN.

The wireless network interface will become

inactive with this setting.

On your machine, press MENU.

Press a or b to display Network and press

Network.

Press Network I/F.

Press Wired LAN.

Press Stop/Exit.

Windows