Brother DCP-7060D Panduan Pengguna Tingkat Lanjut - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Pengguna Tingkat Lanjut untuk Semua dalam Satu Printer Brother DCP-7060D. Brother DCP-7060D 33 halaman. Printers
Juga untuk Brother DCP-7060D: Panduan Pengaturan Cepat (20 halaman), Panduan Pengaturan Cepat (20 halaman), Panduan Pengguna Tingkat Lanjut (24 halaman), Panduan Pengaturan Cepat (15 halaman), Panduan Pengguna Dasar (5 halaman)

• If the machine receives a print job before

you put the sheet of paper in the manual

feed slot, the machine will finish the Drum

Cleaning process first, and then print the

print job.

When the machine has finished

cleaning, the machine returns to Ready

mode.

Repeat steps e to h two more times

using a new blank sheet of paper each

time. Upon completion please discard

the used paper.

If the problem is not solved yet, follow the

steps below.

Open the front cover and leave the

machine turned on for 10 minutes to

cool down.

WARNING

HOT SURFACE

After you have just used the machine, some

internal parts of the machine will be

extremely hot. When you open the front or

back cover (back output tray) of the

machine, DO NOT touch the shaded parts

shown in the illustration. If you do this, you

may get burned.

Routine maintenance

Slowly take out the drum unit and toner

cartridge assembly.

CAUTION

We recommend that you put the drum unit

and toner cartridge assembly on a clean,

flat surface with a sheet of disposable

paper or cloth underneath it in case you

accidentally spill or scatter toner.