Brother DCP-J125 Panduan Pengguna Tingkat Lanjut - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna Tingkat Lanjut untuk Semua dalam Satu Printer Brother DCP-J125. Brother DCP-J125 27 halaman.
Juga untuk Brother DCP-J125: Panduan Pengguna Tingkat Lanjut (30 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Pengaturan Cepat (2 halaman)
Halaman Cetak
1
General setup
Memory storage
Your menu settings are stored permanently,
and in the event of a power failure will not be
lost. If you have chosen Set New Default,
settings in the PHOTO CAPTURE mode will
not be lost. Temporary settings (for example,
Contrast) will be lost.
Sleep Mode
You can choose how long the machine must
be idle (from 1 to 60 minutes) before it goes
into sleep mode. The timer will restart if any
operation is carried out on the machine.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Sleep Mode.
Press OK.
d
Press a or b to choose 1Min, 2Mins,
3Mins, 5Mins, 10Mins, 30Mins or
60Mins which is the length of time the
machine is idle before entering sleep
mode.
Press OK.
e
Press Stop/Exit.
LCD display
1
Changing LCD language
You can change the LCD language.
a
Press Menu.
b
Press a or b to choose
Initial Setup.
Press OK.
1
c
Press a or b to choose
Local Language.
Press OK.
d
Press a or b to choose your language.
Press OK.
e
Press Stop/Exit.
LCD Contrast
You can adjust the LCD contrast for a sharper
and more vivid display. If you are having
difficulty reading the LCD, try changing the
contrast setting.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose LCD Contrast.
Press OK.
e
Press d to decrease the contrast or
press c to increase the contrast.
Press OK.
f
Press Stop/Exit.
1
1
1
1
1
1