Brother DCP-J140W Panduan Memulai Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Semua dalam Satu Printer Brother DCP-J140W. Brother DCP-J140W 21 halaman. Advanced users manual spainish - english and spanish
Juga untuk Brother DCP-J140W: Panduan Pengaturan Cepat (33 halaman), Panduan Pengguna Tingkat Lanjut (22 halaman), Panduan Keamanan Produk (16 halaman), Panduan Pengguna Tingkat Lanjut (21 halaman), (Bahasa Inggris) Panduan Konfigurasi Cepat (32 halaman), (Panduan Pengguna Tingkat Lanjut) (23 halaman)

Take care to match the colour of the lever with

the cartridge colour.

Install each ink cartridge in the direction of the

arrow on the label.

Gently push the ink cartridge until it clicks. After

all the ink cartridges are installed close the ink

cartridge cover.

Check the print quality

When the preparation process has finished, the

LCD shows this message

Set Paper and

Press Start

Press Colour Start.

Check the quality of the four colour blocks on

the sheet. (black/yellow/cyan/magenta)

If all lines are clear and visible, press a (Yes) to

finish the quality check and go to step 8.

If you can see missing short lines, press b (No)

and follow the steps on the LCD.

Press Menu.

Press a or b to choose 0.Initial Setup.

Press OK.

Press a or b to choose 1.Date&Time.

Press OK.

Press a or b to enter the last two digits of the

year, and then press OK.

Repeat for the Month and Day, and then Hours

and Minutes in 24-hour format.

Press Stop/Exit.