Fujitsu 3NGF70811 Panduan Pengoperasian - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pendingin Udara Fujitsu 3NGF70811. Fujitsu 3NGF70811 15 halaman.
Halaman Cetak
■ Examples of Weekly timer
Example 1
7:00
9:00
Monday
Program
Program
1
2
to
Friday
On
Off
26 °C
Wake up Leave for
work
Saturday
Sunday
Program
1
Off
(On)
(On)
Example 2: You can specify temperature settings using the On timer in
the Weekly timer.
7:00
9:00
Program 1
Program 2
On
On
28 °C
26 °C
6.2. On timer or Off timer
1. Select On timer or Off timer in step 2 of "Timer setting
procedure".
(
)
2. Press
to set on time or off time.
Pressing the button: The time will change by +5/-5 minutes.
Pressing down the button: The time will change by +10/-10 minutes.
• To deactivate the On/Off timer, press
shown on the remote controller display.
The indicator will disappear.
6.3. Program timer
1. Set On timer and Off timer. (Refer to "6.2. On timer or Off
timer").
2. Select Program timer in step 2 of "Timer setting procedure".
The timer whose setting time is closer to the current time works first.
The order of the timer operation is displayed as follows:
Timer
Indicator on the remote controller display
On→Off timer
Off→On timer
NOTES: You can set the Program timer only within a span of 24 hours.
6.4. Sleep timer
1. Select Sleep timer in step 2 of "Timer setting procedure".
(
)
2. Press
to set the time until the operation
stops.
Each time you press the button, the time changes as follows:
0H
1H
2H
30M
00M
00M
(30 min.)
• To deactivate the Sleep timer, press
on the remote controller display.
The indicator will disappear.
During the Sleep timer operation, the setting temperature changes as
the following figure.
In Heating mode
1 °C 2 °C 3 °C 4 °C
30 min.
1 hour
1.5 hour
Set time
After the set time has elapsed, the air conditioner operation turns off.
En-7
11:00
17:00
Program
Program
3
On
28 °C
Come back
Go to
home
sleep
(No timer settings)
Program
Program
Program
2
3
Off
Off
(On)
(On)
17:00
23:00
Program 3
Program 4
On
On
27 °C
28 °C
while
3H
5H
7H
9H
00M
00M
00M
00M
hours
while
is shown
In Cooling or Dry mode
Set time
Set
temperature
1 hour
1 °C
7. ENERGY SAVING OPERATIONS
23:00
7.1. Economy operation
4
It saves more electricity than other operation modes by changing the set
Off
temperature to a moderate setting.
Press
)
)
operation.
[
] indicator on the indoor unit will turn on.
Operation
mode
4
Cooling/Dry
Few degrees higher than the set temperature
Off
Heating
Few degrees lower than the set temperature
NOTES:
• In the Cooling, Heating, or Dry mode, the maximum output of this
operation is approximately 70 % of usual operation.
• This operation cannot be performed during the temperature
monitoring by the Auto mode.
7.2. Fan control for energy saving
In the Cooling operation, when the room
temperature reaches the set temperature, the
indoor unit fan rotates intermittently to save
power. (This function is activated at the time of
purchase.)
To change the setting, use the following
steps;
1. Press
until only the clock is displayed on the remote
is
controller display.
2. Press down
The current Fan Control status (
3. Press
deactivated (
4. Press
to send the setting to the indoor unit.
The display will return to the original screen.
NOTES: If you do not press any buttons for 30 seconds after
displayed,
step 2.
8. OTHER OPERATIONS
8.1. Powerful operation
In the Powerful operation, the air conditioner will operate at maximum
power and strong airflow to cool down or warm up the room quickly.
NOTES: In multi connection, this function cannot be used.
Press
)
)
When activated, the indoor unit will emit 2 short beeps.
When deactivated, the indoor unit will emit 1 short beep.
The Powerful operation will be turned off automatically in the following
situations:
• The Powerful operation runs for a certain amount of time and the
room temperature reaches the set temperature in the Cooling, Dry,
or Heating mode.
• 20 minutes after the Powerful operation has started.
NOTES:
• The airflow direction and the fan speed are controlled automatically.
• The Powerful operation cannot be performed simultaneously with
Economy operation.
• The Powerful operation overrides the following operations. If the
following operation is set, they will start after the Powerful operation
finishes.
- Outdoor Unit Low Noise operation
2 °C
• If the wired remote controller (optional) is connected, this function is
restricted.
to activate/deactivate the Economy
Room temperature
for more than 5 seconds.
) is displayed.
to switch between activated (
).
will turn off. In this case, repeat the setting from
to activate/deactivate the Powerful operation.
) or
is