Fujitsu ABT14RB Panduan Pengoperasian - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pendingin Udara Fujitsu ABT14RB. Fujitsu ABT14RB 17 halaman. Fujitsu floor console/ under ceiling dual type room air conditioners

Halaman Cetak

SLEEP TIMER OPERATION

Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operate is stopped.

To Use the SLEEP timer

While the air conditioner is operating or stopped, press the

SLEEP button.

Both the indoor unit's OPERATION indicator lamp (red) and the TIMER indicator

lamp (green) will light.

To Change the Timer Settings

Press the SLEEP button once again and set the time using the

SET TIME buttons.

Set the time while the Timer Mode Display is flashing (the flashing will continue for

about five seconds).

button: Press to advance the time.

button: Press to reverse the time.

About five seconds later, the entire display will reappear.

About the SLEEP timer

To prevent excessive warming or cooling during sleep, the SLEEP timer function automatically modifies the thermostat setting

in accordance with the time setting. When the set time has elapsed, the air conditioner completely stops.

During Heating operation (HEAT & COOL MODEL (Reverse

cycle) only):

When the SLEEP timer is set, the thermostat setting is

automatically lowered 1 °C every thirty minutes. When the

thermostat has been lowered a total of 4 °C, the thermostat

setting at that time is maintained until the set time has elapsed,

at which time the air conditioner automatically turns off.

SLEEP timer setting

minutes

1 hour

30 minutes

MANUAL AUTO OPERATION

Use the MANUAL AUTO operation in the event the remote control unit is lost or otherwise unavailable.

How To Use the Main Unit Controls

Press the MANUAL AUTO button on the main unit control

panel.

To stop operation, press the MANUAL AUTO button once again.

1 °C

2 °C

3 °C

4 °C

Set time

To Cancel the Timer:

Use the TIMER button to select "TIMER

RESET".

The air conditioner will return to normal

operation.

To Stop the Air Conditioner During

Timer Operation:

Press the START/STOP button.

During Cooling/Dry operation:

When the SLEEP timer is set, the thermostat setting is auto-

matically raised 1 °C every sixty minutes. When the thermo-

stat has been raised a total of 2 °C, the thermostat setting at

that time is maintained until the set time has elapsed, at which

time the air conditioner automatically turns off.

SLEEP timer setting

Do not press the MANUAL AUTO button with

wet hands or pointed objects, otherwise an

electric shock or malfunction may occur.

G When the air conditioner is operated

G The fan speed selected will be "AUTO"

Set time

1 hour

2 °C

1 °C

CAUTION!

with the controls on the Main unit, it

will operate under the same mode as

the AUTO mode selected on the re-

mote control unit (see page 7).

and the thermostat setting will be

23 °C.