Fujitsu AG*G12LVCA Panduan Teknis - Halaman 27

Jelajahi secara online atau unduh pdf Panduan Teknis untuk Pendingin Udara Fujitsu AG*G12LVCA. Fujitsu AG*G12LVCA 47 halaman. Floor type

4) Room temperature control for heating

Depending on the installed environment, correction of the room temperature sensor may be

required.

Select the appropriate control setting according to the installed environment.

Setting Description

Standard



Lower control

Slightly higher control

Higher control

5) Auto restart

Enable or disable automatic restart after a power interruption.

Setting Description

Enable



Disable

* Auto restart is an emergency function such as for power outage etc. Do not attempt to use this

function in normal operation.

Be sure to operate the unit by remote controller or other external input device.

6) Room temperature sensor switching

(Only for wired remote controller)

When using the Wired remote controller temperture sensor, change the setting to "Both" (01).

Setting Description

Indoor unit



Both

00: Sensor on the indoor unit is active.

01: Sensors on both indoor unit and wired remote controller is active.

7) Remote controller signal code

(Only for wireless remote controller)

The indoor unit signal code can be changed. Select the appropriate signal code.

Setting Description



(  . . .Factory setting)

Function Number

Setting Value

(  . . .Factory setting)

Function Number

Setting Value

(  . . .Factory setting)

Function Number

Setting Value

(  . . .Factory setting)

Function Number

Setting Value

- (01 - 24) -