AEG Oko-Favorit 50719 Panduan Servis - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Servis untuk Mesin pencuci piring AEG Oko-Favorit 50719. AEG Oko-Favorit 50719 35 halaman.
Halaman CetakThe components required for water softening.
1.
softener unit
2.
regeneration dosage chamber
The incoming water flows through the softener which works
according to the ion exchange principle. The ion exchanger is
filled with small epoxy resin balls. The resins exchange the
hardness constituents (calcium and magnesium), for sodium
ions.
When all the sodium ions are used up, it is necessary to
regenerate the softener. This is done by flushing a brine
solution through the softener.
Afterwards the softener is washed out with fresh water and is
now fully effective.
Depending on the water hardness, regeneration is only necessary after several wash cycles.
Detergent dispenser (1)
Drying fan intake vent (2)
Spray arms (3)
TSE-N 10.00 A. B.
2
1
2
1
- 7 -
3
3
1
2
599 50 84 90 EN