2N IP Verso Manual - Halaman 9

Jelajahi secara online atau unduh pdf Manual untuk Sistem interkom 2N IP Verso. 2N IP Verso 15 halaman. Set-up with a peaknx touch panel and youvi

enabled" and "Anonymous access".

24.

Further down the page, you can also set the IP address of the panel as the "Authorized

address"

so that the stream can be accessed only from the panel. This will be dis-

played in the lower part of the YOUVI Dashboard App.

25.

To operate the door station with the PEAKnx touch panels, it is necessary to increase

the microphone volume on the panel, depending on the VoIP software used.

Note:

If the microphone gain is too high, the transmission may be cut off and the sound quality

may deteriorate.

To do this, right-click or long-press the loudspeaker icon in the taskbar and select

"Sounds".

In the

"Recording"

In the following menu, you can set the microphone level in the

3. Setting up the YOUVI camera module (with Bria Solo Free)

To make use of the 2N door station's camera, it needs to be added and set up within YOUVI

Configuration.

To add the camera module open YOUVI Dashboard on the panel and select Install

Camera Device. If you do not have a full license yet, you can purchase it in the PEAKnx

Shop.

Switch to YOUVI Dashboard > Camera Device OR open the configuration page on your

PC in your browser, making sure that the system running the browser is on the same

Set-up of a 2N door station with a PEAKnx touch panel

tab, select the first microphone.

"Levels"

tab.