AEG OKO_FAVORIT 5070 Petunjuk Pengguna - Halaman 22

Jelajahi secara online atau unduh pdf Petunjuk Pengguna untuk Mesin pencuci piring AEG OKO_FAVORIT 5070. AEG OKO_FAVORIT 5070 44 halaman. Electrolux user instructions dishwasher 5070

Halaman Cetak

Operating instructions

Start the Wash Programme

1. Check that when the dishes and cutlery are loaded into the dishwasher

the spray arms are free to rotate.

2. Open the tap fully.

3. Shut the door.

4. Press the ON/OFF button. The ON/OFF button indicator illuminates.

5. Press the programme button for the desired programme (see "Pro-

gramme Table"). The programme indicator illuminates. The selected

programme begins after around 6 seconds. During the wash pro-

gramme the current programme step is indicated on the programme

progress display.

If END or DRYING on the programme progress display flash after the

start of the programme, please read the "What to do, if..." section.

Changing/Interrupting/Cancelling

the Wash Programme

Only change or interrupt a wash programme in progress if it is abso-

lutely necessary to do so.

Changing the wash programme

If you want to change the wash programme within 6 seconds of mak-

ing a programme selection, briefly press the button for the new wash

program.

If you want to change the wash programme at a later point in time, use

the following procedure:

1. Press the button for the new wash programme and hold it pressed. The

indicators for both programmes now flash.

2. After a few seconds only the indicator for the new programme flashes.

Release the programme button, the new programme is now running.

Interrupting the wash programme by opening the door of the

dishwasher

Hot steam may escape from the appliance when opening the door.

Open the door carefully.

1. Open the door of the dishwasher. The wash programme stops.

2. The indicator for the programme that is currently running extinguishes.

3. Close the door. The wash programme continues.